{"product_id":"125769-01-bently-nevada-machine-condition-monitoring-module","title":"125769-01 | Bently Nevada | Machine Condition Monitoring Module","description":"\u003cp\u003eConfigured for real-time vibration and shock data acquisition in condition monitoring platforms, the \u003cstrong\u003eBently Nevada 125769-01\u003c\/strong\u003e (\u003cstrong\u003e125769-01\u003c\/strong\u003e Machine Condition Monitoring Module) provides direct physical execution of signal processing for critical rotating equipment.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e125769-01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard modular form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-30 deg C to +65 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e5 W (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eVibration and shock data acquisition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring and TSI Integration\u003c\/h3\u003e\n\u003cp\u003eThe 125769-01 module is engineered to interface with proximity and seismic transducers to perform high-fidelity monitoring of rotor dynamics. Precise eddy-current probe scaling is required to ensure that the converted electrical signal accurately reflects mechanical displacement. During commissioning, gap voltage validation at -10 VDC targets confirms that the sensor is operating within the linear measurement range, which is critical for valid fault detection. To maintain signal integrity, the module employs internal filtering to achieve cross-talk suppression between channels, preventing interference between disparate measurement points on the same rotating assembly.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this module be configured to perform on-board logic execution?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the module supports programmable logic functions for local alarm processing. This allows for immediate response based on defined vibration or shock thresholds independent of the host software.\u003c\/p\u003e\n\u003cp\u003eQ: Is the 125769-01 module hot-swappable?\u003c\/p\u003e\n\u003cp\u003eA: The module is designed for standard modular integration. Ensure the rack or terminal base is powered down or isolated according to local safety protocols prior to removal or insertion to prevent backplane signal corruption.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule Placement\u003c\/strong\u003e: Insert the module into the designated slot of the condition monitoring rack or terminal base. Ensure the mechanical alignment pins are correctly seated before applying pressure to the backplane connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding\u003c\/strong\u003e: Ensure the rack or mounting chassis is tied to the site instrumentation ground. Use shielded cabling for all sensor inputs and terminate the shields at the designated ground bars to reduce EMI-induced noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Calibration\u003c\/strong\u003e: After physical installation, perform a calibration check using the configuration software to verify that the module scaling matches the connected sensor type (e.g., proximity or accelerometer).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e: Use 16-22 AWG wiring for signal terminations. Ensure all terminal screws are tightened to the manufacturer's specified torque to prevent intermittent contact resulting from vibration.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53601520976056,"sku":"125769-01","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/350045135137-01_755b1515-2993-428d-8ff8-3e10808de61f.jpg?v=1781753682","url":"https:\/\/www.globalpetroparts.com\/products\/125769-01-bently-nevada-machine-condition-monitoring-module","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}