{"product_id":"144181-51-bently-nevada-3300-xl-proximitor-sensor","title":"144181-51 | Bently Nevada 3300 XL | Proximitor Sensor","description":"\u003cp\u003eConfigured for high-frequency vibration signal acquisition in 3300 XL NSv monitoring platforms, the \u003cstrong\u003eBently Nevada 144181-51\u003c\/strong\u003e (\u003cstrong\u003e144181-51\u003c\/strong\u003e) Proximitor Sensor provides direct physical execution of eddy-current signal conditioning for shaft displacement analysis. This unit translates transducer-generated proximity signals into proportional voltage outputs for integration into machinery monitoring systems.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e144181-51\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.26 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8 cm x 6 cm x 6.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003e3300 XL NSv\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring and TSI Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e144181-51\u003c\/strong\u003e sensor is designed to maintain precise eddy-current probe scaling, ensuring linearity across the intended displacement range of the machine shaft. The sensor requires strict gap voltage validation to maintain -10 VDC targets, which allows for accurate baseline monitoring and fault detection in rotating equipment. Proper installation is required to manage rotor dynamics, where any misalignment or structural resonance can alter the signal output. Additionally, the device is engineered with internal circuitry for cross-talk suppression, which prevents signal corruption when multiple probes are mounted in close proximity on the same bearing housing.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What are the primary installation requirements to ensure signal accuracy for the 144181-51?\u003c\/p\u003e\n\u003cp\u003eA: The probe must be mounted to prevent mechanical looseness, and the extension cable must be routed away from high-voltage AC cables to prevent induced noise. The gap voltage must be verified using a digital multimeter at the terminal block to confirm the -10 VDC target before system calibration.\u003c\/p\u003e\n\u003cp\u003eQ: Is this sensor compatible with standard 3300 XL monitoring systems?\u003c\/p\u003e\n\u003cp\u003eA: The 144181-51 is a 3300 XL NSv specific component. Ensure that the associated monitoring module firmware and system configuration files are set to the NSv (Near-field Sensing) profile to ensure correct signal interpretation.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Gap Setting\u003c\/strong\u003e: Use a feeler gauge to set the initial gap between the probe tip and the target surface. Adjust the output voltage to match the -10 VDC mid-range requirement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Protection\u003c\/strong\u003e: Keep all coaxial connectors clean and free of oil or debris to prevent signal attenuation. Ensure the connector covers are tightened to maintain environmental integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding\u003c\/strong\u003e: Ground the cable shield only at the monitoring system end to avoid ground loop currents that can introduce 50\/60 Hz interference into the vibration signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Stability\u003c\/strong\u003e: Use a rigid bracket assembly to ensure the probe remains stationary relative to the target shaft; use locking nuts to secure the probe position after calibration.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53517704265912,"sku":"144181-51","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/144181-51.jpg?v=1779936147","url":"https:\/\/www.globalpetroparts.com\/products\/144181-51-bently-nevada-3300-xl-proximitor-sensor","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}