{"product_id":"1783-us03t01f-allen-bradley-stratix-managed-switches","title":"1783-US03T01F | Allen-Bradley | Stratix Managed Switches","description":"\u003cp\u003eConfigured for high-speed industrial data transmission in Ethernet networks, the \u003cstrong\u003eAllen-Bradley 1783-US03T01F\u003c\/strong\u003e (\u003cstrong\u003e1783-US03T01F\u003c\/strong\u003e Ethernet switch) provides direct physical execution of signal switching across 100 Mbps copper and fiber-optic media. This managed unit facilitates data traffic management through three RJ-45 copper ports and one fiber-optic port, utilizing a 62.5\/125 micron link budget. The internal circuitry supports an input voltage range of 20 VAC or 24 VDC, with integrated isolation circuitry rated at 30 V. The module architecture is designed to handle an inrush current of 2.2 A during start-up, ensuring stability within the power distribution profile of the control cabinet.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e1783-US03T01F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAllen-Bradley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.48 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eIndustrial Standard DIN-Rail Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC \/ 20 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Data Rate\u003c\/td\u003e\n\u003ctd\u003e100 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Configuration\u003c\/td\u003e\n\u003ctd\u003e3 Copper, 1 Fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation Voltage\u003c\/td\u003e\n\u003ctd\u003e30 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInrush Current\u003c\/td\u003e\n\u003ctd\u003e2.2 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiber Optic Budget\u003c\/td\u003e\n\u003ctd\u003e62.5\/125 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet and EtherNet\/IP Deterministic Network Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe 1783-US03T01F Stratix switch is engineered to operate within deterministic Ethernet\/IP and Profinet network architectures. It supports packet prioritization and traffic management to minimize jitter and latency for time-critical automation data. By utilizing managed switching capabilities, the device assists in maintaining network integrity, ensuring that high-priority control frames are processed with minimal delay compared to standard unmanaged switches. The configuration supports standard industrial protocol frames, enabling integration with programmable logic controllers and distributed I\/O systems requiring consistent network throughput.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Can the fiber-optic port on the 1783-US03T01F support distances exceeding typical copper limits?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the fiber-optic port utilizing a 62.5\/125 micron link budget allows for significantly longer transmission distances compared to the 100-meter limitation of standard RJ-45 copper Ethernet cabling, depending on the specific fiber transceivers and cable attenuation.\u003c\/p\u003e\n\u003cp\u003eQ: Is this switch capable of hot-swapping under load?\u003c\/p\u003e\n\u003cp\u003eA: While the 1783-US03T01F is designed for rugged industrial use, disconnecting the power or data cables while the switch is operational may cause temporary network interruptions for all connected devices. It is standard practice to verify network topology before removing the device from an active bus.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMount the 1783-US03T01F onto a standard 35 mm DIN-rail. Ensure the locking mechanism is fully engaged to provide secure grounding and mechanical stability.\u003c\/li\u003e\n\u003cli\u003eConnect the 24 VDC or 20 VAC power source to the designated input terminals. Ensure proper polarity is observed for DC power inputs to prevent internal circuit damage.\u003c\/li\u003e\n\u003cli\u003eTerminate copper Ethernet cables using shielded RJ-45 connectors. Maintain a minimum bend radius of four times the cable diameter to prevent signal degradation.\u003c\/li\u003e\n\u003cli\u003eClean fiber-optic connectors using industry-standard optical cleaning wipes before insertion into the fiber port. Ensure the fiber cable matches the 62.5\/125 micron specification to avoid link budget losses.\u003c\/li\u003e\n\u003cli\u003eGround the switch chassis to the cabinet earth bus using a low-impedance connection to mitigate surge transients and maintain the 30 V isolation rating.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Allen Bradley","offers":[{"title":"Default Title","offer_id":53559364518072,"sku":"1783-US03T01F","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/1783-US03T01F.png?v=1780888643","url":"https:\/\/www.globalpetroparts.com\/products\/1783-us03t01f-allen-bradley-stratix-managed-switches","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}