{"product_id":"2094-bm03-s-allen-bradley-integrated-axis-module","title":"2094-BM03-S | Allen-Bradley | Integrated Axis Module","description":"\u003cp\u003eThe \u003cstrong\u003eAllen-Bradley 2094-BM03-S\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e2094-BM03-S\u003c\/strong\u003e Axis Module, operates as a dedicated hardware component for multi-axis servo control and power conversion within Kinetix 6000 drive systems.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e2094-BM03-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAllen-Bradley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\/Global\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5.87 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Kinetix 6000 AXM profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 50 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent on drive load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Class\u003c\/td\u003e\n\u003ctd\u003e400 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNom Drive Voltage\u003c\/td\u003e\n\u003ctd\u003e360-480 VAC (3 Phase)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Current\u003c\/td\u003e\n\u003ctd\u003e21.2 A RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Current\u003c\/td\u003e\n\u003ctd\u003e53.0 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Power Out\u003c\/td\u003e\n\u003ctd\u003e13.5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Shunt Resistor\u003c\/td\u003e\n\u003ctd\u003e115 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication and Firmware\u003c\/h3\u003e\n\u003cp\u003eThe 2094-BM03-S utilizes the Kinetix 6000 backplane bus to maintain high-speed, deterministic communication between the axis module and the control interface. Firmware flash compatibility is mandatory for proper synchronization; users must ensure that the motion controller firmware revision is compatible with the axis module's logic build. The module supports I\/O density scaling by allowing multiple axis modules to be cascaded on a single DC bus, with backplane communication velocity tuned to prevent command jitter during high-bandwidth motion profiles. Configuration changes require a power cycle to re-initialize the bus communication parameters.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Can this axis module be hot-swapped while the Kinetix 6000 DC bus is energized?\u003c\/p\u003e\n\u003cp\u003eA: No. Hot-swapping is not permitted. All AC input power must be removed and the DC bus must be fully discharged before attempting to install or remove the module to prevent damage to the backplane connectors and sensitive electronics.\u003c\/p\u003e\n\u003cp\u003eQ: How is the velocity loop bandwidth configured on this axis?\u003c\/p\u003e\n\u003cp\u003eA: The velocity loop bandwidth is software-defined through the motion control software. The module hardware supports up to 500 Hz, but final tuning must account for the mechanical load inertia and the physical rigidity of the connected actuator.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMounting: Install the module on a grounded panel. Ensure that the integrated heat sink has sufficient airflow clearance to maintain the 0 to 50 deg C operating temperature range.\u003c\/li\u003e\n\u003cli\u003eGrounding: Connect the module chassis to a low-impedance earth ground to provide adequate shielding against electromagnetic interference and to dissipate high-frequency leakage currents.\u003c\/li\u003e\n\u003cli\u003eWiring: Use shielded twisted-pair cables for motor feedback and command lines. Ensure that power cabling (motor leads and DC bus) is routed separately from signal wiring to minimize noise induction.\u003c\/li\u003e\n\u003cli\u003eBus Connections: Verify that all DC bus bar connections are torqued to specifications to ensure low-resistance contact for high-current power distribution.\u003c\/li\u003e\n\u003cli\u003eShielding: Terminate all cable shields at the designated ground lugs on the drive chassis to maintain a continuous, low-impedance path to earth ground.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Allen Bradley","offers":[{"title":"Default Title","offer_id":53559470325944,"sku":"2094-BM03-S","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/2094-BM03-S.jpg?v=1780890842","url":"https:\/\/www.globalpetroparts.com\/products\/2094-bm03-s-allen-bradley-integrated-axis-module","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}