{"product_id":"330101-00-08-10-02-05-3300-xl-8-mm-proximity-probe-bently-nevada","title":"330101-00-08-10-02-05 3300 XL 8 mm Proximity Probe | Bently Nevada","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330101-00-08-10-02-05\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330101-00-08-10-02-05\u003c\/strong\u003e Proximity Sensor, operates as a dedicated hardware component for non-contact displacement measurement within TSI monitoring platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330101-00-08-10-02-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.55 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8 mm (Tip Diameter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e-24 VDC (nominal, via Proximitor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal System Length\u003c\/td\u003e\n\u003ctd\u003e1.0 metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Rotor Dynamics\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e330101-00-08-10-02-05\u003c\/strong\u003e transducer is engineered for precise shaft displacement monitoring. It requires a calibrated scaling factor of 7.87 V\/mm (200 mV\/mil). During site installation, gap voltage validation against the -10 VDC target midpoint is mandatory to ensure linear operation. Deviations from this voltage indicate improper gap positioning, which compromises the accuracy of rotor dynamics data, including shaft centerline behavior and vibration amplitude. To maintain signal integrity, cross-talk suppression must be observed by ensuring adequate physical separation between adjacent probes during multi-channel installation.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is it permissible to field-shorten the integral cable?\u003c\/p\u003e\n\u003cp\u003eA: No. The \u003cstrong\u003e330101\u003c\/strong\u003e system is a factory-calibrated unit consisting of the probe, integral cable, and Proximitor sensor. Field-modifying the cable length alters the electrical impedance, leading to significant measurement inaccuracies.\u003c\/p\u003e\n\u003cp\u003eQ: How is the probe protected against high-pressure fluids?\u003c\/p\u003e\n\u003cp\u003eA: The probe features a Viton O-ring seal at the tip-to-case junction to manage differential pressure. Probes are not pressure-tested prior to shipment; verify sealing integrity per machine-specific requirements if the installation involves high-pressure lubrication or process fluids.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Secure the probe in a rigid, vibration-resistant bracket. Ensure the probe tip is installed perpendicular to the target surface to prevent measurement skew.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding\u003c\/strong\u003e: The probe case is electrically conductive; verify the installation bracket is properly bonded to the machinery casing to maintain immunity to electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Integrity\u003c\/strong\u003e: Ensure the ClickLoc miniature coaxial connectors are clean and fully seated to prevent intermittent signals. Use high-purity electrical contact cleaner if debris is present.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing\u003c\/strong\u003e: Route coaxial cables through dedicated grounded conduits, maintaining separation from high-voltage AC lines to prevent induced noise on the displacement signal.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53598287921336,"sku":"330101-00-08-10-02-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/330906-02-12-05-02-00_bc8136e9-6230-4ed9-9685-5a3644ff4bf4.png?v=1781668815","url":"https:\/\/www.globalpetroparts.com\/products\/330101-00-08-10-02-05-3300-xl-8-mm-proximity-probe-bently-nevada","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}