{"product_id":"330105-02-12-05-02-05-bently-nevada-3300-xl-8mm-proximity-transducer-system","title":"330105-02-12-05-02-05 | Bently Nevada 3300 XL 8mm Proximity Transducer System","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330105-02-12-05-02-05\u003c\/strong\u003e, also cataloged as the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330105\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eReverse Mount Probe, operates as a dedicated hardware component for non-contacting displacement and vibration measurement within 3500 Machinery Protection System platforms. It translates the physical gap distance between the probe tip and the target rotating shaft into a high-frequency eddy-current signal for proximity transmitter evaluation.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe complete model nomenclature breakdown for this configuration is defined as follows:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330105\u003c\/strong\u003e: Base model for 3300 XL 8 mm Reverse Mount Probe (3\/8-24 UNF thread parameters).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02\u003c\/strong\u003e: Unthreaded length option.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e12\u003c\/strong\u003e: Overall case length option.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05\u003c\/strong\u003e: Total Length Option designating 0.5 metre (1.6 feet) of integrated cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02\u003c\/strong\u003e: Connector Option designating a miniature ClickLoc coaxial connector.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05\u003c\/strong\u003e: Agency Approval Option designating Multiple Approvals (combined ATEX\/IECEx, CSA, and options for hazardous areas).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330105-02-12-05-02-05\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eU.S.A.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.5 kg (Shipping Weight)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eDimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eStandard reverse mount probe form factor with 0.5 m cable length\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 deg C to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePassive sensor loop (Driven by external Proximitor Sensor)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eSystem Calibration\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm (200 mV\/mil) scale factor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCase Thread\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3\/8-24 UNF\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eConnector Type\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature ClickLoc coaxial connector\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eGap Voltage Validation and Eddy-Current Scaling\u003c\/h3\u003e\n\u003cp\u003eProper mechanical installation relies on absolute gap voltage validation during static positioning. Technicians must adjust the mechanical insert depth of the reverse mount probe housing to achieve a targeted -10 VDC output at the Proximitor terminal block layer, placing the sensor at the exact midpoint of its calibrated linear range. This alignment satisfies standard eddy-current probe scaling metrics, ensuring a linear conversion scale factor of 7.87 V\/mm (200 mV\/mil) is maintained across the measuring envelope. Precise physical gapping isolates the system from cross-talk suppression failures and guarantees the accurate tracking of high-frequency rotor dynamics without physical interface contact.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How is the physical continuity and signal shielding maintained at the ClickLoc joint?\u003c\/p\u003e\n\u003cp\u003eA: The miniature ClickLoc coaxial connector utilizes a positive-lock mechanical collar that ensures constant physical electrical contact. Ground isolation must be managed via external connector sleeves to prevent external electromagnetic noise injection into the sensor loop circuit.\u003c\/p\u003e\n\u003cp\u003eQ: Is hot-swapping or disconnect of the probe allowed while the Proximitor is energized?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the probe can be physically disconnected from the extension cable or Proximitor while powered. However, this action breaks the signal loop, causing the Proximitor output voltage to clamp to its maximum saturation limit, which will trigger an immediate NOT OK status fault on the associated monitor card.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eReverse Mount Mechanical Positioning\u003c\/strong\u003e: Thread the probe assembly carefully into the reverse mount housing or sleeve adapter. Avoid over-torqueing the 3\/8-24 UNF thread structure to prevent deformation of the sensor tip internal core.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCoaxial Routing Restrictions\u003c\/strong\u003e: Route the 0.5 metre integrated cable through approved non-conductive sleeves or flexible conduit blocks. Maintain a minimum mechanical bend radius of 25.4 mm to prevent inner-conductor shielding cracks.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Ground Separation\u003c\/strong\u003e: Ensure the coaxial shield layer is isolated from the physical machine casing. Grounding must occur at exactly one point, terminated at the instrument rack or junction box common bus terminal.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTarget Surface Condition\u003c\/strong\u003e: Verify that the targeted shaft surface area is free from mechanical scoring, chrome plating variances, or high residual magnetism, as these anomalies distort eddy-current fields and create false runout signals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53504059539640,"sku":"330105-02-12-05-02-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/330105-02-12-05-02-00_d80976e2-06f4-48b1-9ac2-4b3fc654ac61.png?v=1779680133","url":"https:\/\/www.globalpetroparts.com\/products\/330105-02-12-05-02-05-bently-nevada-3300-xl-8mm-proximity-transducer-system","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}