{"product_id":"330730-080-01-00-bently-nevada-3300-xl-11-mm-extension-cable","title":"330730-080-01-00 | Bently Nevada | 3300 XL 11 mm Extension Cable","description":"\u003cp\u003eConfigured for signal transmission in TSI platforms, the \u003cstrong\u003eBently Nevada 330730-080-01-00\u003c\/strong\u003e (\u003cstrong\u003e330730\u003c\/strong\u003e Extension Cable) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330730\u003c\/strong\u003e: 3300 XL 11 mm Extension Cable base model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e080\u003c\/strong\u003e: 8.0 meters (26.2 feet) total length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e01\u003c\/strong\u003e: Armored cable configuration (Flexible AISI 302 SST with FEP jacket).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00\u003c\/strong\u003e: No agency approval required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330730-080-01-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.36 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8.0 m cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive (Signal path)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e69.9 pF\/m typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring and TSI Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe 330730 extension cable acts as a segment of the 3300 XL transducer loop, which relies on eddy-current probe scaling to convert shaft motion into a proportional voltage signal. Achieving correct gap voltage validation, targeting -10 VDC at the Proximitor output, requires the preservation of the electrical impedance characteristic of this cable. Installers must prioritize cross-talk suppression by maintaining spatial separation between this extension cable and high-energy power lines. Any degradation in the cable shield or mechanical armor will introduce electromagnetic noise, resulting in errors in rotor dynamics data collection.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the 8.0 meter cable length be field-trimmed if the installation path is shorter than expected?\u003c\/p\u003e\n\u003cp\u003eA: No. The transducer system is calibrated as a matched set including the probe, extension cable, and Proximitor. Altering the cable length changes the system impedance, which degrades frequency response and measurement linearity.\u003c\/p\u003e\n\u003cp\u003eQ: Does the AISI 302 SST armor impact the electrical performance of the cable?\u003c\/p\u003e\n\u003cp\u003eA: No. The stainless steel armor provides mechanical protection against abrasion and physical stress without altering the electrical characteristics, such as the 69.9 pF\/m nominal capacitance.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Mating:\u003c\/strong\u003e Ensure ClickLoc connectors are fully engaged. Do not use tools to apply torque; tighten by hand until the locking mechanism seats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Handling:\u003c\/strong\u003e Observe a minimum bend radius of 25.4 mm (1.0 in) to protect the internal coaxial structure and the integrity of the flexible armor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding:\u003c\/strong\u003e The cable shield must remain continuous to the Proximitor mounting base. Ensure a low-impedance connection to the machine chassis to reject common-mode noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Environment:\u003c\/strong\u003e While the cable is rated for -51 deg C to +177 deg C, ensure the connector junctions are protected from fluid ingress or corrosive chemicals that could permeate the FEP jacket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Securing:\u003c\/strong\u003e Use non-metallic cable clamps to secure the armored extension cable at regular intervals to prevent wear from machine vibration.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53581286441144,"sku":"330730-080-01-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/330103-00-07-10-02-00_8ea37b91-c309-432d-b661-7a0d3f03f478.jpg?v=1781146737","url":"https:\/\/www.globalpetroparts.com\/products\/330730-080-01-00-bently-nevada-3300-xl-11-mm-extension-cable","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}