{"product_id":"330905-00-18-05-02-05-bently-nevada-3300-nsv-proximity-probe","title":"330905-00-18-05-02-05 | Bently Nevada | 3300 NSv Proximity Probe","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330905-00-18-05-02-05\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330905\u003c\/strong\u003e Proximity Probe, operates as a dedicated hardware component for non-contacting vibration and displacement measurement within Bently Nevada 3300 NSv machinery monitoring systems.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330905-00-18-05-02-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.92 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e25.2 cm x 2.4 cm x 12.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003eM10 x 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e0.5 meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eDependent on system integration limits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDerived from Proximitor Sensor supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Signal Validation\u003c\/h3\u003e\n\u003cp\u003eThe 3300 NSv system requires precise gap voltage validation to ensure linear measurement performance. The probe operates with a target -10 VDC nominal gap voltage when positioned at the center of the linear range relative to the target material. Maintenance personnel must verify that the transducer system signal output corresponds to the required 7.87 V\/mm (200 mV\/mil) sensitivity. Any deviation in the gap voltage outside the designated operational range indicates improper probe positioning, which can compromise rotor dynamics analysis and lead to inaccurate radial vibration or axial position readings.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the ClickLoc connector be exposed to high-humidity environments without additional protection?\u003c\/p\u003e\n\u003cp\u003eA: No. While the ClickLoc connector provides a secure mechanical and electrical connection, it is not environmentally sealed. Install the connector within a weather-tight junction box or conduit system to prevent moisture ingress and signal noise.\u003c\/p\u003e\n\u003cp\u003eQ: Is it permissible to modify the 0.5 meter cable length?\u003c\/p\u003e\n\u003cp\u003eA: No. The 3300 NSv system is calibrated for a specific total system length, including the probe, extension cable, and Proximitor sensor. Altering the cable length will shift the electrical calibration and induce measurement errors.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Mounting:\u003c\/strong\u003e Ensure the M10 x 1 probe thread is installed into a rigid, vibration-free bracket. Use jam nuts to secure the probe position once the target gap is established.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProximity to Conductors:\u003c\/strong\u003e Maintain a minimum clearance from surrounding metal objects (excluding the target) as specified in the 3300 NSv manual to prevent field interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding and Shielding:\u003c\/strong\u003e Route the coaxial cable away from high-voltage AC lines or variable frequency drive (VFD) cabling to prevent electromagnetic interference (EMI). Ensure the cable shield is grounded only at the monitoring system end to prevent ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Handling:\u003c\/strong\u003e Use the ClickLoc mechanism to ensure positive engagement. Do not apply excessive lateral force to the connector during installation, as this may fracture the internal ceramic components.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53590125478072,"sku":"330905-00-18-05-02-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/330905-00-15-05-02-05_22d6a869-8544-404a-81a3-38a347a2829d.png?v=1781495334","url":"https:\/\/www.globalpetroparts.com\/products\/330905-00-18-05-02-05-bently-nevada-3300-nsv-proximity-probe","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}