{"product_id":"330905-07-17-05-02-05-3300-nsv-proximity-probe-bently-nevada","title":"330905-07-17-05-02-05 3300 NSv Proximity Probe | Bently Nevada","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330905-07-17-05-02-05\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330905\u003c\/strong\u003e Proximity Probe, operates as a dedicated hardware component for non-contact vibration and displacement measurement within 3300 NSv machinery monitoring platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eSuffix\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330905\u003c\/td\u003e\n\u003ctd\u003eBase Model: 3300 NSv Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e07\u003c\/td\u003e\n\u003ctd\u003eUnthreaded Length: 70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003ctd\u003eOverall Case Length: 170 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003eTotal Length: 0.5 meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eConnector: Miniature coaxial ClickLoc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003eAgency Approvals: Multiple\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330905-07-17-05-02-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eM10 x 1 Thread \/ 170 mm Case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +82 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement Range\u003c\/td\u003e\n\u003ctd\u003e0 to 1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e2 Hz to 10 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eGap Voltage Validation and Rotor Dynamics\u003c\/h3\u003e\n\u003cp\u003eConsistent transducer performance depends on precise gap voltage validation. The probe system must be calibrated to a nominal -10 VDC gap voltage at the target center, ensuring linear operation across the 1.5 mm range. Maintenance personnel are required to verify this bias point using a high-impedance digital multimeter to confirm that the transducer signal path is correctly balanced. In applications involving complex rotor dynamics, proper gap monitoring prevents output saturation, which is critical for the accurate spectral analysis of radial vibration and the detection of shaft centerline position shifts. Cross-talk suppression must be enforced by maintaining required physical separation between adjacent probe tips to avoid modulation interference.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the IP67 environmental rating maintained if the ClickLoc connector is not connected to a sealed junction box?\u003c\/p\u003e\n\u003cp\u003eA: No. While the probe body and cable assembly are rated IP67, the ClickLoc connector interface itself is not environmentally sealed. The connector must be housed within a NEMA-rated or IP67-rated junction box to prevent moisture and contaminant ingress.\u003c\/p\u003e\n\u003cp\u003eQ: Can the 4-20 mA output be directly interfaced with a standard PLC input card?\u003c\/p\u003e\n\u003cp\u003eA: The 4-20 mA output signal is provided for process integration, but users must ensure the loop load resistance does not exceed the specified maximum for the 24 VDC power supply. Ensure the signal return is isolated to prevent ground loops with the host PLC.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Positioning:\u003c\/strong\u003e Install the M10 x 1 threaded body into a rigid, vibration-isolated bracket. Secure the jam nuts after reaching the target -10 VDC gap voltage to prevent mechanical shift during high-speed operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing:\u003c\/strong\u003e Maintain a minimum bend radius of 25 mm for the coaxial cable to prevent dielectric stress. Route the cable through grounded metallic conduit, keeping it at least 30 cm away from high-voltage AC cabling to mitigate electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding:\u003c\/strong\u003e Terminate the cable shield at the monitoring system chassis ground. Avoid multiple ground points, which can introduce low-frequency noise (50\/60 Hz) into the vibration waveform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Care:\u003c\/strong\u003e Inspect the ClickLoc pins for debris before mating. Ensure the locking collar is fully rotated to the \"locked\" position to maintain electrical continuity under vibratory conditions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53590136062136,"sku":"330905-07-17-05-02-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/330905-00-15-05-02-05_849c70db-3fce-4e5d-af49-b3a60d1d2727.png?v=1781496052","url":"https:\/\/www.globalpetroparts.com\/products\/330905-07-17-05-02-05-3300-nsv-proximity-probe-bently-nevada","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}