{"product_id":"330930-060-01-cn-bently-nevada-3300-xl-standard-extension-cable","title":"330930-060-01-CN | Bently Nevada | 3300 XL Standard Extension Cable","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330930-060-01-CN\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e3300 XL\u003c\/strong\u003e Extension Cable, operates as a dedicated hardware component for signal transmission between proximity probes and monitoring instrumentation within Bently Nevada machinery protection systems.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330930-060-01-CN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eU.S.A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.27 kg (Net)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e6.0 m length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot applicable (Passive component)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e6.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003eStainless steel armor with FEP jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eRotor Dynamics and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThe performance of the 3300 XL transducer chain is contingent upon strict impedance matching to maintain the integrity of the eddy-current probe scaling. This extension cable is engineered with a high-durability FEP jacket and stainless steel armor to provide mechanical protection while maintaining the electrical characteristics required for accurate rotor position and vibration data. Operators must perform gap voltage validation during installation to confirm that the output matches the -10 VDC target range at the required probe air-gap. Deviations in the transducer chain often correlate to connector contamination or excessive cable run distances; thus, ensuring signal continuity without degradation is necessary for consistent rotor dynamics monitoring.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the stainless steel armor be removed from the 330930-060-01-CN for easier routing?\u003c\/p\u003e\n\u003cp\u003eA: No. The armor is an integral part of the cable assembly. Removing or damaging the armor exposes the coaxial core to mechanical stress and EMI, which will compromise signal integrity and may lead to non-linear transducer output.\u003c\/p\u003e\n\u003cp\u003eQ: Is it permissible to use this cable with different probe models within the 3300 XL series?\u003c\/p\u003e\n\u003cp\u003eA: Compatibility depends on the system calibration requirements. The transducer system (probe, extension cable, and Proximitor sensor) must be calibrated as a matched set. Mixing components without recalibration will result in invalid gap voltage readings and inaccurate monitoring data.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling:\u003c\/strong\u003e Avoid exceeding the minimum bend radius of 25 mm. Sharp bends can permanently deform the coaxial geometry and alter the cable capacitance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Ensure all coaxial connectors are tightened by hand until metal-to-metal contact is achieved. The use of tools can over-tighten and damage the gold-plated pins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding:\u003c\/strong\u003e Maintain the continuity of the cable shield throughout the entire run. Ground the system only at the monitor end to prevent the formation of ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRouting:\u003c\/strong\u003e Keep the cable run at least 300 mm away from high-voltage AC cables or switching components to reduce the influence of electromagnetic noise on the low-level signal path.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53595485044920,"sku":"330930-060-01-CN","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/330930-045-03-CN_6e3f554d-368d-4e6b-b467-af1be10bffbf.png?v=1781580632","url":"https:\/\/www.globalpetroparts.com\/products\/330930-060-01-cn-bently-nevada-3300-xl-standard-extension-cable","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}