{"product_id":"3500-42e-285691-01-vibration-monitor-bently-nevada","title":"3500\/42E 285691-01 Vibration Monitor | Bently Nevada","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 3500\/42E 285691-01\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e3500\/42E\u003c\/strong\u003e Vibration Monitor, operates as a dedicated hardware component for continuous shaft vibration and position signal acquisition within 3500 Monitoring System platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e3500\/42E 285691-01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e450 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eStandard 3500 rack supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring and TSI Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e3500\/42E\u003c\/strong\u003e module requires precise eddy-current probe scaling to ensure that input signals accurately map to machine displacement parameters. During system integration, operators must perform gap voltage validation, targeting -10 VDC at the monitor input to confirm that proximity probes are positioned within their linear measurement range. The module employs internal circuitry designed for cross-talk suppression, which prevents signal interference between adjacent input channels. This electrical isolation is required to maintain the fidelity of rotor dynamics data, particularly when analyzing harmonic vibration components on high-speed rotating machinery.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is this module compatible with existing 3500\/42M configurations?\u003c\/p\u003e\n\u003cp\u003eA: The 3500\/42E is an evolution within the 3500 product line. Verify firmware compatibility and configuration software version requirements to ensure full interoperability with existing 3500 rack backplanes and communication gateways.\u003c\/p\u003e\n\u003cp\u003eQ: Does this module support hot-swapping during operation?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the module supports hot-swap functionality. Ensure the module is fully seated within the rack slot to engage the backplane pins correctly. Avoid removing the module if it is currently providing active, non-bypassed machine protection signals without first initiating a system bypass.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion\u003c\/strong\u003e: Slide the module into the designated rack slot. Ensure proper alignment with the backplane connector before applying pressure to engage the locking levers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e: Terminate sensor signals to the corresponding rear-mounted I\/O module. Ensure all shielded cables are grounded at the rack instrumentation common point to prevent ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e: Utilize the 3500 configuration software to map the physical inputs to the desired measurement channels. Verify that all alarm setpoints are loaded to the module memory.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValidation\u003c\/strong\u003e: Measure the DC gap voltage at the I\/O terminal pins to confirm that sensor excitation and probe distance are within the operational limits defined by the machine monitoring strategy.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53518150369464,"sku":"285691-01","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/350020125744-02_30a73711-6114-485a-951d-0fb2dcaa01ec.jpg?v=1779948647","url":"https:\/\/www.globalpetroparts.com\/products\/3500-42e-285691-01-vibration-monitor-bently-nevada","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}