{"product_id":"allen-bradley-1734sc-if4u-point-i-o-analog-input-module","title":"Allen-Bradley 1734SC-IF4U POINT I\/O Analog Input Module","description":"\u003cp\u003eConfigured for universal signal acquisition in POINT I\/O platforms, the \u003cstrong\u003eAllen-Bradley 1734SC-IF4U\u003c\/strong\u003e (\u003cstrong\u003e1734SC-IF4U\u003c\/strong\u003e Analog Input Module) provides direct physical and electrical execution of 4-channel analog input monitoring across distributed control network environments.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e1734SC-IF4U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAllen-Bradley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSubject to manufacturing batch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.08 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard POINT I\/O plug-in profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard industrial ambient range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo. of Inputs\u003c\/td\u003e\n\u003ctd\u003e4 universal channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Type\u003c\/td\u003e\n\u003ctd\u003eUniversal Analog Input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eIndustrial Control and Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe 1734SC-IF4U integrates into the POINT I\/O bus, facilitating I\/O density scaling through local rack expansion. The module utilizes backplane bus communication to transfer converted analog values to the host controller. Firmware flash compatibility is supported to allow for system-level synchronization of data formats and sampling intervals. The universal input design allows for flexible configuration of signal types per channel, provided the physical connections comply with the module's electrical input impedance and voltage\/current limits.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the 1734SC-IF4U support hot-swapping during normal system operation?\u003c\/p\u003e\n\u003cp\u003eA: The POINT I\/O system generally supports hot-swapping; however, users must verify the specific backplane base compatibility. Ensure that the field power is removed before inserting or removing the module to prevent electrical arcing or damage to the backplane communication pins.\u003c\/p\u003e\n\u003cp\u003eQ: Are the inputs on this module isolated from one another?\u003c\/p\u003e\n\u003cp\u003eA: No. The channels are not channel-to-channel isolated. Users must ensure that all connected sensors share a common reference point and that no external potentials are introduced that could violate the module's common-mode voltage limits.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Secure the module onto the compatible POINT I\/O terminal base. Ensure the mechanical locking tab is fully engaged to guarantee electrical contact with the POINTBus backplane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Use shielded twisted-pair cabling for all analog input signals. Route signal wires away from high-voltage AC cables or motor leads to prevent electromagnetic interference (EMI) from distorting input data.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Connect the cable shield drain wire to the chassis ground terminal on the terminal base. A low-impedance connection to the cabinet's protective earth ground is required to maintain the accuracy of the analog conversion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Verify that the software configuration matches the physical wiring of the universal inputs (e.g., current vs. voltage mode) before powering the field-side circuits to avoid potential damage to the input circuitry.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Allen Bradley","offers":[{"title":"Default Title","offer_id":53549031751864,"sku":"1734SC-IF4U","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/1734SC-IF4U.jpg?v=1780627472","url":"https:\/\/www.globalpetroparts.com\/products\/allen-bradley-1734sc-if4u-point-i-o-analog-input-module","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}