{"product_id":"allen-bradley-1783-us08t-stratix-2000-switch","title":"Allen-Bradley 1783-US08T Stratix 2000 Switch","description":"\u003cp\u003eConfigured for deterministic data routing in industrial Ethernet networks, the \u003cstrong\u003eAllen-Bradley 1783-US08T\u003c\/strong\u003e (\u003cstrong\u003e1783-US08T\u003c\/strong\u003e Stratix 2000 Switch) provides direct physical\/electrical execution of high-speed packet switching across 8 RJ45 ports.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e1783-US08T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAllen-Bradley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.26 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eNot Specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-10 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e400 mA at 24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e20 VAC \/ 24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e30 Volts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInrush Current\u003c\/td\u003e\n\u003ctd\u003e2.2 Amperes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e1783-US08T\u003c\/strong\u003e serves as the primary unmanaged switch utilized to execute traffic segmentation across EtherNet\/IP platforms. The device supports standard 5E cabling (2 or 4 pair) for reliable signal propagation at 10\/100 Mbps. Its hardware architecture is optimized for low-latency frame forwarding, which is required to maintain deterministic timing for control-level traffic. Firmware flash compatibility is not applicable to this unmanaged model, simplifying deployment in static network topologies. Users must ensure that the total cumulative bandwidth of connected field devices does not exceed the port capacity to prevent packet collisions and frame buffering delays during peak utilization.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the 1783-US08T support IGMP snooping or advanced traffic prioritization?\u003c\/p\u003e\n\u003cp\u003eA: No. As an unmanaged switch, the 1783-US08T operates on a store-and-forward basis without configurable traffic management features like IGMP snooping or VLAN tagging.\u003c\/p\u003e\n\u003cp\u003eQ: Is this switch capable of being powered by redundant power supplies?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the switch accepts dual input power to facilitate redundant power sourcing. This ensures the unit remains operational in the event of a single supply failure.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMount the switch on a 35 mm DIN-rail, ensuring proper orientation for vertical airflow to facilitate passive heat dissipation.\u003c\/li\u003e\n\u003cli\u003eConnect the 20 VAC or 24 VDC power supply to the redundant input terminals; verify that the supply is rated for the 2.2 A inrush current requirement.\u003c\/li\u003e\n\u003cli\u003eUse shielded 5E Ethernet cabling for connections; terminate shields to the chassis ground terminal to mitigate electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003eLimit cable length to 100 meters per port to comply with IEEE 802.3 standards and avoid signal attenuation.\u003c\/li\u003e\n\u003cli\u003eEnsure the switch enclosure is properly grounded to the cabinet's protective earth bus to satisfy 30 V isolation requirements.\u003c\/li\u003e\n\u003cli\u003eVerify link activity using the status LEDs located on the front panel before commissioning the network nodes.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Allen Bradley","offers":[{"title":"Default Title","offer_id":53514827563192,"sku":"1783-US08T","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/1783-US08T.jpg?v=1779853008","url":"https:\/\/www.globalpetroparts.com\/products\/allen-bradley-1783-us08t-stratix-2000-switch","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}