{"product_id":"analog-output-modules-ic200alg430-ge-versamax","title":"Analog Output Modules IC200ALG430 GE VersaMax","description":"\u003cp\u003eThe \u003cstrong\u003eGE IC200ALG430\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIC200ALG430\u003c\/strong\u003e Mixed Analog Module, operates as a dedicated hardware component for simultaneous analog input digitization and analog output current generation within VersaMax I\/O platforms. The module interfaces directly with field transmitters and control elements, executing high-precision analog-to-digital transformations for voltage\/current input channels while synchronously driving analog current output loops based on cyclic system updates.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC200ALG430\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.18 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e66.8 mm x 128 mm x 50.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e120 mA maximum at 5 VDC from backplane \/ 100 mA maximum at 24 VDC external\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Channels\u003c\/td\u003e\n\u003ctd\u003e4 differential analog channels (voltage or current)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Channels\u003c\/td\u003e\n\u003ctd\u003e2 single-ended current channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Ranges\u003c\/td\u003e\n\u003ctd\u003e0-10 VDC, -10 to +10 VDC, 4-20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e12 bits (analog input and analog output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe hardware layout matches timing profiles specified for Profinet \/ EtherNet\/IP deterministic networks to enforce constant scan intervals over the backplane rail. Internal conversion electronics map field voltage and current steps into standardized data words without disrupting backplane bus communication velocity. Active firmware flash compatibility inside the product group guarantees predictable sampling rates, avoiding processing delays during high-density I\/O density scaling adjustments across adjacent expansion blocks.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is online hot-swap deployment supported for the IC200ALG430 interface card?\u003c\/p\u003e\n\u003cp\u003eA: No, the hardware cannot be unseated or inserted while the underlying carrier base is energized. Removing the component under power causes logic signal interruptions and risks degradation of the internal multiplexer elements.\u003c\/p\u003e\n\u003cp\u003eQ: What is the operational impact if the external 24 VDC field supply fails?\u003c\/p\u003e\n\u003cp\u003eA: A loss of external 24 VDC loop power halts the output channel drive capability and triggers an internal error register, flagging a channel-side fault to the master processor over the backplane bus.\u003c\/p\u003e\n\u003cp\u003eQ: How are current and voltage input options selected on individual input lines?\u003c\/p\u003e\n\u003cp\u003eA: Signal type selection is handled through selective jumper configuration on the underlying terminal carrier block coupled with explicit hardware configuration parameter settings in the software workspace.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eFix the hardware base vertically onto a level 35 mm DIN-rail panel layout using a matching VersaMax terminal block carrier. Maintain a clear perimeter boundary of at least 50 mm around the top and bottom ventilation slats to permit continuous natural airflow for heat sink dissipation. Route all analog input and output cables through dedicated, shielded twisted-pair runs separated from alternative high-voltage power lines or motor drive cabling. Ground the instrumentation shields to a dedicated clean earth bar inside the enclosure panel, keeping the link isolated from common-mode electrical noise sources.\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":53596272427192,"sku":"IC200ALG430","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/IC200ALG430_2.jpg?v=1781600165","url":"https:\/\/www.globalpetroparts.com\/products\/analog-output-modules-ic200alg430-ge-versamax","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}