{"product_id":"bently-nevada-133827-02-i-o-module","title":"Bently Nevada 133827-02 I\/O Module","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 133827-02\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e133827-02\u003c\/strong\u003e I\/O Module, operates as a dedicated hardware component for signal interfacing and data acquisition within 3500 Machinery Protection System platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e133827-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eRefer to product labeling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.84 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eNot specified in technical documentation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard industrial ambient range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSystem-dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent Category\u003c\/td\u003e\n\u003ctd\u003ePLC \/ Machine Control I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring \u0026amp; Eddy-Current Validation\u003c\/h3\u003e\n\u003cp\u003eThe 133827-02 interface module is engineered to facilitate raw signal acquisition from eddy-current proximity transducers. Effective operation requires precise gap voltage validation, maintaining a target operating point of -10 VDC to ensure linear transducer response within the designated measurement range. During installation, users must verify correct probe scaling factors to align physical rotor displacement with digitized feedback. Cross-talk suppression must be addressed through proper routing of signal cables, separating transducer leads from high-voltage AC lines to prevent induced noise in the rotor dynamics monitoring loops.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the 133827-02 module compatible with legacy Bently Nevada 3500 series racks?\u003c\/p\u003e\n\u003cp\u003eA: Compatibility is contingent upon the backplane revision and firmware version of the host 3500 system. Verify that the rack firmware supports the specific module ID before integration.\u003c\/p\u003e\n\u003cp\u003eQ: What are the grounding requirements for the signal I\/O to prevent loop interference?\u003c\/p\u003e\n\u003cp\u003eA: All transducer signals must utilize shielded cabling, with the shield grounded at the rack entry point or a common instrumentation ground bus to maintain signal integrity and satisfy common-mode noise rejection requirements.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Installation Inspection\u003c\/strong\u003e: Inspect the backplane connectors for pin alignment and verify that no mechanical obstructions exist within the slot guides.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Procedure\u003c\/strong\u003e: Slide the module into the designated slot until the locking levers engage with the rack frame, ensuring uniform pressure across the backplane connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Cabling\u003c\/strong\u003e: Terminate transducer inputs according to the loop schematic. Maintain a consistent wire gauge and ensure that insulation is stripped to the minimum length required for terminal contact to minimize exposed conductor lengths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValidation\u003c\/strong\u003e: Power the rack and verify the module status LEDs. Use a voltmeter to measure the output gap voltage from the transducer to confirm it resides within the expected -10 VDC nominal range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Integration\u003c\/strong\u003e: Perform a software-based channel check to confirm that the input signal is correctly mapped to the monitoring rack configuration.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53611805769912,"sku":"133827-02","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/133827-02.png?v=1782099502","url":"https:\/\/www.globalpetroparts.com\/products\/bently-nevada-133827-02-i-o-module","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}