{"product_id":"bently-nevada-172323-01-1900-65a-asset-condition-monitoring-system","title":"Bently Nevada 172323-01 1900\/65A Asset Condition Monitoring System","description":"\u003cp\u003eConfigured for multi-parameter equipment health assessment within 1900 series platforms, the \u003cstrong\u003eBently Nevada 172323-01\u003c\/strong\u003e (\u003cstrong\u003e1900\/65A\u003c\/strong\u003e Equipment Monitor) provides direct physical and electrical execution for machinery sensor signal processing and alarm condition monitoring.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e172323-01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.289 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.2 cm x 12.4 cm x 12.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard industrial ambient range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSystem-dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eAsset Condition Monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring \u0026amp; Rotor Dynamics Integration\u003c\/h3\u003e\n\u003cp\u003eThe 1900\/65A monitor provides signal conditioning for diverse input types, including vibration, temperature, and speed. System accuracy is contingent upon rigorous gap voltage validation for eddy-current inputs, typically targeting a -10 VDC center-gap to maintain linear transducer output. The monitor performs real-time rotor dynamics analysis, processing raw inputs to identify common machinery faults such as sub-synchronous instability or shaft misalignment. Cross-talk suppression is maintained through differential input architecture and proper shielded cabling practices, preventing external electromagnetic interference from impacting the digitized machine parameters. Proper probe scaling configuration is mandatory to align the voltage-to-physical unit conversion with the specific mechanical transducer characteristics installed on the monitored asset.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the 1900\/65A monitor support hot-swapping under power?\u003c\/p\u003e\n\u003cp\u003eA: The monitor is designed for standard industrial mounting and should be serviced according to power-off safety protocols unless explicitly configured for hot-swapping within a managed rack environment. Always verify rack status before module extraction.\u003c\/p\u003e\n\u003cp\u003eQ: How is the axial position reference established in this monitor?\u003c\/p\u003e\n\u003cp\u003eA: Axial position is derived from the transducer scaling factor and a defined mechanical zero point, established by correlating the -10 VDC gap voltage to the physical null position of the shaft during system commissioning.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Installation Preparation\u003c\/strong\u003e: Verify that the mounting surface is clean and level to ensure stability. Confirm that environmental conditions do not exceed the specified rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Secure the monitor to the designated DIN-rail or panel interface using the provided retention hardware. Ensure mechanical grounding is established via the housing to the system chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Cabling\u003c\/strong\u003e: Terminate transducer leads to the terminal blocks, ensuring that all signal cable shields are grounded at the system entry point to mitigate common-mode noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Integrity\u003c\/strong\u003e: Tighten all terminal connections to manufacturer specifications. Avoid sharp bends in proximity probe cables to prevent physical fatigue and subsequent resistance errors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Validation\u003c\/strong\u003e: Power the monitor and utilize the configuration software to perform a channel-check. Verify that field-measured gap voltages align with the software-reported inputs to confirm sensor accuracy.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53613038272696,"sku":"172323-01 1900\/65A","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/190065A_8360ddb8-8699-4eb4-9880-77a69a825893.jpg?v=1782108853","url":"https:\/\/www.globalpetroparts.com\/products\/bently-nevada-172323-01-1900-65a-asset-condition-monitoring-system","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}