{"product_id":"bently-nevada-330130-030-00-05-3300-xl-standard-extension-cable","title":"Bently Nevada 330130-030-00-05 3300 XL Standard Extension Cable","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330130-030-00-05\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e3300 XL\u003c\/strong\u003e Standard Extension Cable, operates as a dedicated hardware component for signal transmission between 8 mm proximity probes and Proximitor sensors within Bently Nevada 3300 XL transducer systems.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330130-030-00-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e3.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eClickLoc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm \/ 3300 5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.28 kg (nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eAPI 670 (4th Edition)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring and TSI Integration\u003c\/h3\u003e\n\u003cp\u003eThe integrity of the signal path in eddy-current transducer systems relies on consistent impedance matching and minimal signal degradation. The 330130-030-00-05 cable is engineered to maintain system calibration across temperature extremes without requiring individual component bench calibration. In rotor dynamics applications, the cable contributes to the system's ability to track gap voltage targets, typically centered at -10 VDC. The design utilizes shielded coaxial geometry to minimize RFI\/EMI interference, ensuring that the dynamic vibration signals and static gap measurements are transmitted to the Proximitor sensor with high signal-to-noise ratios, facilitating accurate analysis of shaft radial position and axial displacement.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is this extension cable compatible with legacy non-XL 3300 series 5 mm proximity probe systems?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The 3300 XL system components are designed for backward compatibility with 3300 series 5 mm and 8 mm transducer components, allowing for mixed-system integration.\u003c\/p\u003e\n\u003cp\u003eQ: Are there specific installation requirements regarding the connector torque for the ClickLoc mechanism?\u003c\/p\u003e\n\u003cp\u003eA: The ClickLoc connectors must be fully engaged to ensure electrical continuity and environmental sealing. Tighten the connector until it clicks into the locked position; do not over-tighten with mechanical tools.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding and Grounding\u003c\/strong\u003e: Ensure the coaxial cable shield remains continuous throughout the run to the junction box. Avoid grounding the shield at the probe end to prevent ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing\u003c\/strong\u003e: Maintain separation from high-voltage AC power cabling to prevent electromagnetic interference. Utilize dedicated conduit or cable trays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Protection\u003c\/strong\u003e: Protect the cable jacket from sharp edges and excessive pull tension during installation. Ensure the minimum bend radius is not exceeded to prevent damage to the internal coaxial dielectric.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Care\u003c\/strong\u003e: Inspect the connector pins for debris or moisture before mating. Ensure the protective covers are removed only immediately prior to connection.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53601480704184,"sku":"330130-030-00-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/330130-030-00-05_c991cd15-3dc5-4c92-8341-f4886e7414dd.jpg?v=1781749656","url":"https:\/\/www.globalpetroparts.com\/products\/bently-nevada-330130-030-00-05-3300-xl-standard-extension-cable","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}