{"product_id":"bently-nevada-330130-075-00-00-3300-xl-extension-cable","title":"Bently Nevada 330130-075-00-00 3300 XL Extension Cable","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330130-075-00-00\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330130\u003c\/strong\u003e Extension Cable, operates as a dedicated hardware component for high-frequency vibration signal transmission within TSI monitoring platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330130-075-00-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.32 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e20.5 cm x 22 cm x 3 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive (Signal throughput)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Impedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm (Triaxial)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Rotor Dynamics\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e330130-075-00-00\u003c\/strong\u003e extension cable acts as a critical link in the transducer system, which is factory-calibrated to a nominal scale factor of 7.87 V\/mm (200 mV\/mil). Variations in total system impedance caused by cable length mismatches directly impact the output signal linearity and the accuracy of rotor dynamics measurements. In multi-channel monitoring applications, cables must be routed to maintain cross-talk suppression and prevent electromagnetic interference from distorting shaft vibration data processed by the TSI instrumentation.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this 7.5 metre extension cable be shortened in the field?\u003c\/p\u003e\n\u003cp\u003eA: No. The transducer system is calibrated as a matched assembly, including the probe, extension cable, and Proximitor sensor. Field-modifying the cable length alters the electrical impedance and resonant frequency, which will introduce significant measurement errors.\u003c\/p\u003e\n\u003cp\u003eQ: Is the extension cable compatible with standard 3300 XL Proximitor sensors?\u003c\/p\u003e\n\u003cp\u003eA: Yes, provided the total system length (probe plus extension cable) matches the calibration requirements of the Proximitor sensor. Ensure that the connector types are consistent with the installed system architecture.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Secure the cable at regular intervals to prevent mechanical strain on the connectors. Use non-conductive cable ties to avoid creating potential ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding\u003c\/strong\u003e: The cable shield must be maintained through the coupling to ensure electromagnetic immunity. Ensure no contact between the cable shield and the machine housing exists, except at the approved grounding point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Integrity\u003c\/strong\u003e: Verify that the ClickLoc mechanism is fully seated and locked. The mating surfaces must be clean and free of moisture or oil to prevent signal attenuation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing\u003c\/strong\u003e: Route the coaxial cable through dedicated metallic conduit, keeping signal lines physically separated from high-voltage AC or motor power cables to minimize induced noise.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53598335566008,"sku":"330130-075-00-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/330130-080-00-CN_ce948871-6810-420a-98b7-7a4973eeab29.jpg?v=1781677025","url":"https:\/\/www.globalpetroparts.com\/products\/bently-nevada-330130-075-00-00-3300-xl-extension-cable","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}