{"product_id":"bently-nevada-330130-085-00-05-3300-xl-standard-extension-cable","title":"Bently Nevada 330130-085-00-05 3300 XL Standard Extension Cable","description":"\u003cp\u003eConfigured for signal path extension in machine monitoring systems, the \u003cstrong\u003eBently Nevada 330130-085-00-05\u003c\/strong\u003e (\u003cstrong\u003e330130\u003c\/strong\u003e Standard Extension Cable) provides direct electrical connection between the proximitor sensor and the eddy-current probe. This hardware component maintains the specific impedance characteristics required to transmit high-frequency vibration signals while ensuring the integrity of the displacement measurement loop.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eSuffix\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330130\u003c\/td\u003e\n\u003ctd\u003eBase Model Number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e085\u003c\/td\u003e\n\u003ctd\u003e8.5 metres (27.9 feet) cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eStandard cable without connector protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003eMultiple Agency Approvals (CSA, ATEX, IECEx)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330130-085-00-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8.5 m cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eGap Voltage Validation and Cross-talk Suppression\u003c\/h3\u003e\n\u003cp\u003eThe accuracy of the 3300 XL transducer system is contingent upon maintaining the proper electrical loop calibration. Operators must perform gap voltage validation during commissioning, targeting a baseline of -10 VDC when the probe is at the linear center of its range. Because this 8.5 m cable adds significant electrical length, signal attenuation must be accounted for within the host monitor configuration. To prevent measurement errors, ensure that this cable is routed within dedicated metallic conduits, separated from high-current power cables to provide effective cross-talk suppression and minimize noise pickup on the high-impedance coaxial line.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this cable be used with non-XL series Proximitor sensors?\u003c\/p\u003e\n\u003cp\u003eA: No. The 3300 XL system components are impedance-matched and electrically incompatible with legacy 3300 series proximity transducers. Using this cable with incompatible hardware will lead to incorrect scale factors.\u003c\/p\u003e\n\u003cp\u003eQ: What is the maximum allowable bend radius for this coaxial cable?\u003c\/p\u003e\n\u003cp\u003eA: The minimum static bend radius is 25.4 mm (1.0 inch). Exceeding this limit will deform the internal dielectric and shielding, resulting in characteristic impedance changes and signal distortion.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding\u003c\/strong\u003e: The cable shield must remain continuous through the connectors. Ensure the shield is grounded only at the Proximitor end to prevent ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Integrity\u003c\/strong\u003e: Inspect all coaxial connectors for debris or oxidation before mating. Ensure connections are fully tightened to maintain low contact resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Sealing\u003c\/strong\u003e: If installing in environments with high moisture or chemical exposure, ensure that the connection points are adequately protected by appropriate cable boots or housings, as this model (00 suffix) does not include a dedicated connector protector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRouting\u003c\/strong\u003e: Avoid excessive pulling force on the cable during installation to prevent connector pin displacement or internal wire strain.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53575924711608,"sku":"330130-085-00-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/330130-040-00-CN_23213d15-deb1-4b60-9354-3648c671b99b.png?v=1781059821","url":"https:\/\/www.globalpetroparts.com\/products\/bently-nevada-330130-085-00-05-3300-xl-standard-extension-cable","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}