{"product_id":"bently-nevada-330500-02-04-velomitor-piezo-velocity-sensors","title":"Bently Nevada 330500-02-04 Velomitor Piezo-Velocity Sensor","description":"\u003cp\u003eThe Bently Nevada 330500-02-04 is a high-performance Velomitor Piezo-Velocity Sensor designed to measure absolute vibration on bearing housings, casings, or structural components. Unlike traditional moving-coil velocity transducers, this unit utilizes a specialized piezoelectric accelerometer design with integrated solid-state electronics, ensuring long-term reliability and immunity to mechanical wear.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSolid-state design with no moving parts for extended service life.\u003c\/li\u003e\n\u003cli\u003eCapable of mounting in any orientation (horizontal, vertical, or angled).\u003c\/li\u003e\n\u003cli\u003eIncorporates embedded electronics for direct velocity output.\u003c\/li\u003e\n\u003cli\u003eRugged construction suitable for harsh industrial environments.\u003c\/li\u003e\n\u003cli\u003eIncludes M8 x 1 mounting thread adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachine condition monitoring for rolling-element bearing machines.\u003c\/li\u003e\n\u003cli\u003eDetection of imbalance and misalignment in rotating equipment.\u003c\/li\u003e\n\u003cli\u003eVibration monitoring for motors, pumps, fans, and compressors.\u003c\/li\u003e\n\u003cli\u003eCritical infrastructure in oil and gas, petrochemical, and power generation sectors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330500-02-04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e3.94 mV\/mm\/s (100 mV\/in\/s) +\/- 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity Range\u003c\/td\u003e\n\u003ctd\u003e1270 mm\/s (50 in\/s) peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplitude Linearity\u003c\/td\u003e\n\u003ctd\u003e+\/- 2% to 152 mm\/s (6 in\/s) peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic Output Impedance\u003c\/td\u003e\n\u003ctd\u003eLess than 2400 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003eM8 x 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eCSA, ATEX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e Ensure the mounting surface is flat, clean, and free of debris to ensure accurate vibration transmission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque Specification:\u003c\/strong\u003e Do not exceed the maximum tightening torque of 46 kg-cm (40 in-lb) during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e The sensor is omnidirectional; it may be mounted at any angle required for the application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabling:\u003c\/strong\u003e Supports cable runs up to 305 meters (1,000 feet) without significant signal degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling:\u003c\/strong\u003e As a precision instrument, avoid dropping or subjecting the sensor to high-impact shocks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003ch3\u003eWhat is the 330500-02-04?\u003c\/h3\u003e\u003cp\u003eThe Bently Nevada 330500-02-04 is a ruggedized Velomitor Piezo-velocity Sensor designed for harsh industrial environments, featuring a 2-pin connector, M8 x 1 mounting thread, and multiple agency approvals (CSA, ATEX).\u003c\/p\u003e\u003ch3\u003eWhat are the mounting requirements?\u003c\/h3\u003e\u003cp\u003eThe 330500-02-04 features an M8 x 1 mounting thread adapter, while the internal base is machined with 3\/8-24 threads.\u003c\/p\u003e\u003ch3\u003eCan it be mounted at any angle?\u003c\/h3\u003e\u003cp\u003eYes. Because it uses solid-state electronics and has no moving parts, it can be mounted vertically, horizontally, or at any other angle.\u003c\/p\u003e\u003ch3\u003eWhat is the maximum cable length?\u003c\/h3\u003e\u003cp\u003eIt supports a maximum cable length of up to 305 meters (1,000 feet) without signal degradation.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53965489832120,"sku":"330500-02-04","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/wm_1_b820c961-08f4-4057-8c6c-09e984da70fb.jpg?v=1787414669","url":"https:\/\/www.globalpetroparts.com\/products\/bently-nevada-330500-02-04-velomitor-piezo-velocity-sensors","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}