{"product_id":"bently-nevada-330710-000-060-10-02-00-3300-xl-11-mm-proximity-probe","title":"Bently Nevada 330710-000-060-10-02-00 3300 XL 11 mm Proximity Probe","description":"\u003cp\u003eConfigured for non-contact displacement measurement in TSI platforms, the \u003cstrong\u003eBently Nevada 330710-000-060-10-02-00\u003c\/strong\u003e (\u003cstrong\u003e330710\u003c\/strong\u003e Proximity Probe) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330710\u003c\/strong\u003e: 3300 XL 11 mm Proximity Probe base model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e000\u003c\/strong\u003e: 0 mm unthreaded length option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e060\u003c\/strong\u003e: 60 mm overall case length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10\u003c\/strong\u003e: 1.0 m (3.3 ft) total system length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e02\u003c\/strong\u003e: Miniature coaxial ClickLoc connector with standard cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00\u003c\/strong\u003e: No agency approval required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330710-000-060-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e60 mm case length, 1.0 m cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-52 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive (Requires Proximitor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Diameter\u003c\/td\u003e\n\u003ctd\u003e11 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring and TSI Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe 330710 probe system relies on consistent eddy-current probe scaling to convert target gap into a proportional output voltage. During commissioning, gap voltage validation is performed to achieve a -10 VDC target, ensuring the output signal resides within the linear operating band of the Proximitor sensor. To preserve signal integrity in rotor dynamics monitoring, probes must be oriented 90 deg relative to the shaft axis. Effective cross-talk suppression is achieved by maintaining specified physical clearances from adjacent probes, preventing interference from overlapping electromagnetic fields.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this 1.0 m system length be extended using standard coaxial cables?\u003c\/p\u003e\n\u003cp\u003eA: No. The system is factory-calibrated as a complete loop (Probe, Extension Cable, and Proximitor). Modifying the total cable length changes the electrical impedance, which degrades signal linearity and frequency response.\u003c\/p\u003e\n\u003cp\u003eQ: Is the ClickLoc connector compatible with legacy 3300 series probes?\u003c\/p\u003e\n\u003cp\u003eA: No. The ClickLoc connector is a proprietary interface for the 3300 XL series, providing enhanced mechanical retention compared to previous threaded connector designs.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Thread the probe into the mounting bracket or machine casing using the M16x1.5 thread. Tighten the lock nut securely to prevent mechanical movement caused by vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing:\u003c\/strong\u003e Maintain a minimum bend radius of 25.4 mm (1.0 in) for the coaxial cable to avoid damaging the internal dielectric and shield.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Ensure the probe body maintains a clean, metal-to-metal electrical contact with the machine housing to provide a stable reference ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTarget Interface:\u003c\/strong\u003e Verify that the target material is conductive (typically AISI 4140 steel) and that the target diameter is at least 30.5 mm to minimize measurement edge effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e Monitor the Proximitor output with a digital voltmeter during the final gap adjustment to confirm the -10 VDC setpoint is reached at the desired operational gap.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53580868059320,"sku":"330710-000-060-10-02-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/330103-00-03-10-02-00_5ee1009f-9d2d-4a04-9c94-f2625529f901.jpg?v=1781145041","url":"https:\/\/www.globalpetroparts.com\/products\/bently-nevada-330710-000-060-10-02-00-3300-xl-11-mm-proximity-probe","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}