{"product_id":"bently-nevada-330730-040-01-00-3300-xl-11-mm-extension-cable","title":"Bently Nevada 330730-040-01-00 3300 XL 11 mm Extension Cable","description":"\u003cp\u003eConfigured for signal transmission in TSI platforms, the \u003cstrong\u003eBently Nevada 330730-040-01-00\u003c\/strong\u003e (\u003cstrong\u003e330730\u003c\/strong\u003e Extension Cable) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330730\u003c\/strong\u003e: 3300 XL 11 mm Extension Cable base model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e040\u003c\/strong\u003e: 4.0 meters (13.1 feet) total length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e01\u003c\/strong\u003e: Armored cable configuration (AISI 302 SST with FEP jacket).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00\u003c\/strong\u003e: No agency approval required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330730-040-01-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.140 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e4.0 m cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive (Signal path)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e69.9 pF\/m typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring and TSI Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe 330730 extension cable maintains the necessary system impedance for the 3300 XL transducer loop. Achieving correct gap voltage validation (targeting -10 VDC at the Proximitor output) is contingent upon maintaining the integrity of this cable assembly. To ensure accurate rotor dynamics acquisition, the cable shielding must be maintained throughout the link to prevent signal degradation. Effective cross-talk suppression is achieved by observing cable separation protocols when routing the assembly near high-energy electromagnetic fields or parallel power conduits.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the armored cable configuration change the electrical performance of the extension cable?\u003c\/p\u003e\n\u003cp\u003eA: The addition of the flexible AISI 302 SST armor does not alter the nominal capacitance or impedance of the signal path. It provides increased mechanical protection against physical damage without impacting the transducer frequency response.\u003c\/p\u003e\n\u003cp\u003eQ: Can this cable be used with non-XL series Proximitors?\u003c\/p\u003e\n\u003cp\u003eA: No. This extension cable is impedance-matched for the 3300 XL system. Use with older 3300 or 7200 series Proximitors will result in incorrect system calibration and inaccurate displacement measurement.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Bending:\u003c\/strong\u003e Observe a minimum bend radius of 25.4 mm (1.0 in) for the extension cable to preserve the internal coaxial structure and mechanical armor integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Integrity:\u003c\/strong\u003e Inspect ClickLoc connectors for debris before mating. Tighten only to the specified hand-tight limit to avoid damaging the internal O-ring seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding Ground:\u003c\/strong\u003e Ensure the cable shield is continuous from the probe to the Proximitor. Improper grounding will introduce common-mode noise into the displacement signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArmor Handling:\u003c\/strong\u003e When stripping the FEP outer jacket for termination, take care not to damage the flexible AISI 302 SST armor or the internal cable shield.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration Protection:\u003c\/strong\u003e Secure the armored cable at regular intervals using cable clamps to prevent mechanical fatigue and abrasion at the termination points.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53580960334008,"sku":"330730-040-01-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/330130-080-00-CN_a706334a-7201-4508-8d29-3ac0a756a2ba.jpg?v=1781145369","url":"https:\/\/www.globalpetroparts.com\/products\/bently-nevada-330730-040-01-00-3300-xl-11-mm-extension-cable","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}