{"product_id":"bently-nevada-330730-080-00-00-3300-xl-11-mm-extension-cable","title":"Bently Nevada 330730-080-00-00 3300 XL 11 mm Extension Cable","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330730-080-00-00\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330730\u003c\/strong\u003e Extension Cable, operates as a dedicated hardware component for signal transmission between proximity probes and Proximitor sensors within TSI (Turbine Supervisory Instrumentation) networks.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330730\u003c\/strong\u003e: 3300 XL 11 mm Extension Cable base model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e080\u003c\/strong\u003e: 8.0 meters (26.2 feet) total length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00\u003c\/strong\u003e: Standard cable configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00\u003c\/strong\u003e: No agency approval required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330730-080-00-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8.0 m cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eNot Specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity Rating\u003c\/td\u003e\n\u003ctd\u003eTo 100% (non-submerged)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring and TSI Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe 330730 extension cable maintains the required impedance for the 3300 XL transducer loop. Successful gap voltage validation, targeting -10 VDC at the Proximitor output, depends on the electrical integrity of this cable assembly. To ensure accurate rotor dynamics acquisition, the cable must be routed to avoid electromagnetic interference, employing cross-talk suppression by maintaining spatial separation from high-energy power conductors. Any compromise to the cable shield or dielectric will introduce signal noise, impacting the precision of radial displacement and vibration measurements.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the 8.0 meter length of this extension cable be modified in the field?\u003c\/p\u003e\n\u003cp\u003eA: No. The transducer system is calibrated as a matched set, including the probe, extension cable, and Proximitor. Modifying the cable length alters the electrical impedance, which degrades the frequency response and linearity of the displacement signal.\u003c\/p\u003e\n\u003cp\u003eQ: How does the cable handle high humidity environments?\u003c\/p\u003e\n\u003cp\u003eA: The cable is designed for 100% relative humidity; however, this rating applies to non-submerged conditions. The housing is hermetically sealed to prevent moisture ingress, which could otherwise cause signal drift or impedance changes.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Engagement:\u003c\/strong\u003e Ensure ClickLoc connectors are fully seated until the locking mechanism engages. Avoid applying excessive torque or mechanical stress to the connector interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Protection:\u003c\/strong\u003e Maintain a minimum bend radius of 25.4 mm (1.0 in) to prevent damage to the internal coaxial structure. Secure the cable with appropriate clamps to prevent vibration-induced wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Continuity:\u003c\/strong\u003e Maintain electrical continuity of the cable shield throughout the connection to the Proximitor. Use grounded cable trays or conduits if required to mitigate common-mode noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Sealing:\u003c\/strong\u003e Although the case is hermetically sealed, ensure connector junctions are protected from fluid ingress or corrosive atmospheres that exceed the FEP jacket rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Verify that the monitoring system maintains a single-point ground reference to prevent ground loops, which can manifest as 50\/60 Hz interference in the output signal.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53581044252856,"sku":"330730-080-00-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/330104-000-040-10-02-05_73caadd7-5927-4a24-add1-0f3d5514e285.jpg?v=1781146586","url":"https:\/\/www.globalpetroparts.com\/products\/bently-nevada-330730-080-00-00-3300-xl-11-mm-extension-cable","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}