{"product_id":"bently-nevada-330905-00-25-05-02-05-3300-nsv-proximity-probe","title":"Bently Nevada 330905-00-25-05-02-05 3300 NSv Proximity Probe","description":"\u003cp\u003eConfigured for non-contacting vibration and displacement measurement in the 3300 NSv transducer system, the \u003cstrong\u003eBently Nevada 330905-00-25-05-02-05\u003c\/strong\u003e (\u003cstrong\u003e330905\u003c\/strong\u003e Proximity Probe) provides direct physical signal transduction for machinery monitoring.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eSuffix\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330905\u003c\/td\u003e\n\u003ctd\u003eBase Model: 3300 NSv Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003eUnthreaded Length: 0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003eOverall Case Length: 250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003eTotal Length: 0.5 meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eConnector\/Cable: Miniature coaxial ClickLoc with standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003eAgency Approvals: Multiple\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330905-00-25-05-02-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eM10 x 1 Thread \/ 250 mm Case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-34 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive (Driven by Proximitor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Impedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThe 3300 NSv system requires precise gap voltage validation to ensure linear measurement performance. The probe operates with a target -10 VDC nominal gap voltage when positioned at the center of the linear range relative to the target material. The transducer system is calibrated to provide a sensitivity of 7.87 V\/mm (200 mV\/mil). Maintenance personnel must verify that the output remains within the linear range; readings outside this range indicate incorrect probe positioning or physical interference, which may negatively influence rotor dynamics data accuracy. Cross-talk suppression should be maintained by adhering to the minimum physical separation distances between adjacent probes to prevent frequency interference.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the ClickLoc connector assembly field-serviceable?\u003c\/p\u003e\n\u003cp\u003eA: No. The ClickLoc connector is factory-molded to the FEP-insulated cable. Cutting, splicing, or attempting to repair the connector will alter the electrical impedance and invalidate the system calibration.\u003c\/p\u003e\n\u003cp\u003eQ: Can this probe be installed in environments exceeding 177 deg C?\u003c\/p\u003e\n\u003cp\u003eA: No. Exceeding the specified operating temperature range will result in degradation of the polyphenylene sulfide (PPS) tip and the internal potting materials, leading to premature failure and inaccurate vibration data.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Mounting:\u003c\/strong\u003e Install the probe using the M10 x 1 threaded body. Use jam nuts to secure the probe position relative to the target shaft. Ensure the probe is mounted in a rigid, vibration-free bracket to prevent structural resonance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding and Shielding:\u003c\/strong\u003e Route the 75 Ohm coaxial cable away from high-current power cables and variable frequency drive (VFD) output leads to minimize electromagnetic interference (EMI). Ground the cable shield only at the monitoring system end to prevent ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Integrity:\u003c\/strong\u003e Inspect the ClickLoc connector for contamination prior to mating. Ensure the connection is fully seated to maintain the integrity of the signal path and prevent environmental ingress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e Perform a system verification after installation by measuring the gap voltage at the Proximitor sensor output to confirm it aligns with the -10 VDC target at the desired mechanical gap.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53590127214776,"sku":"330905-00-25-05-02-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/330101-00-40-10-02-00__1_1d0004eb-e639-493f-8ea7-11a76cc2450f.jpg?v=1781495693","url":"https:\/\/www.globalpetroparts.com\/products\/bently-nevada-330905-00-25-05-02-05-3300-nsv-proximity-probe","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}