{"product_id":"bently-nevada-330909-00-60-10-02-00-3300-nsv-proximity-probes","title":"Bently Nevada 330909-00-60-10-02-00 3300 NSv Proximity Probes","description":"\u003cp\u003eConfigured for high-frequency displacement measurement in small-shaft machinery protection networks, the \u003cstrong\u003eBently Nevada 330909-00-60-10-02-00\u003c\/strong\u003e (\u003cstrong\u003e330909-00-60-10-02-00\u003c\/strong\u003e 3300 NSv Proximity Probes) provides direct physical signal acquisition for monitoring rotor dynamics.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330909-00-60-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.2 cm x 12.4 cm x 12.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003ePer 3300 NSv technical documentation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive transducer component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 NSv Proximitor Sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Rotor Dynamics\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e330909-00-60-10-02-00\u003c\/strong\u003e operates as an inductive sensor requiring a matched 3300 NSv Proximitor. The system is designed to provide a linear output of 7.87 V\/mm (200 mV\/mil). Installation requires precise adjustment of the probe tip to achieve a static gap voltage of -10 VDC. Deviation from this target midpoint within the linear range results in signal distortion. Correct scaling is required to capture rotor dynamic phenomena, such as sub-micron radial vibrations and shaft centerline changes, while avoiding cross-talk effects between adjacent sensors in the machine casing.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this probe be used with 3300 XL standard Proximitors?\u003c\/p\u003e\n\u003cp\u003eA: No. The 3300 NSv probes are specifically engineered with distinct coil geometry and frequency characteristics requiring the dedicated 3300 NSv Proximitor Sensor to maintain linear response.\u003c\/p\u003e\n\u003cp\u003eQ: What are the primary constraints when mounting multiple probes?\u003c\/p\u003e\n\u003cp\u003eA: Maintain minimum separation distances between probe tips to prevent electromagnetic interference and cross-talk, which can introduce artificial noise into the vibration monitoring signal.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap Validation\u003c\/strong\u003e: Insert the probe until it contacts the shaft, then retract to achieve the specified static gap voltage of -10 VDC as measured at the Proximitor output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Integrity\u003c\/strong\u003e: Utilize a lock nut to secure the probe position after calibration. Ensure the housing is free from mechanical stress that could cause drift due to thermal expansion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Handling\u003c\/strong\u003e: Protect the coaxial cable from sharp bends and mechanical strain. Ensure the ClickLoc connector is fully seated to prevent impedance variations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding\u003c\/strong\u003e: Ensure the transducer system shares a common instrument ground with the monitor to minimize ground loops and high-frequency noise injection.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53590250258616,"sku":"330909-00-60-10-02-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/330104-00-05-05-02-05_17664a8c-08cc-4513-b320-3d4e56b46feb.jpg?v=1781502962","url":"https:\/\/www.globalpetroparts.com\/products\/bently-nevada-330909-00-60-10-02-00-3300-nsv-proximity-probes","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}