{"product_id":"ge-fanuc-series-90-30-devicenet-master-module-ic693dnm200","title":"GE Fanuc Series 90-30 DeviceNet Master Module IC693DNM200","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGE Fanuc IC693DNM200\u003c\/strong\u003e serves as the primary \u003cstrong\u003eIC693DNM200\u003c\/strong\u003e DeviceNet Master Module utilized to execute high-speed industrial network communication across Series 90-30 platforms. This communication interface enables a Series 90-30 central processing unit to command, configure, and monitor distributed field devices structured on a DeviceNet network. The hardware handles internal data mapping between the network device profiles and the designated PLC %I, %Q, %AI, and %AQ memory sub-registers.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC693DNM200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc (Series 90-30)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eDeviceNet Master Scanner Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.29 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e3.2 cm x 13.0 cm x 11.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e400 mA at 5 VDC from backplane, 40 mA max at 24 VDC from DeviceNet network\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Baud Rates\u003c\/td\u003e\n\u003ctd\u003e125 kbps, 250 kbps, 500 kbps (software selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNode Capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 63 slave devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGalvanic Isolation\u003c\/td\u003e\n\u003ctd\u003e500 VDC between DeviceNet network and backplane logic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStatus Indicators\u003c\/td\u003e\n\u003ctd\u003eModule OK, Network Status, Comm Status LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Network Operations and Firmware Synchronization\u003c\/h3\u003e\n\u003cp\u003eThe module integration uses a localized microcontroller to coordinate DeviceNet network execution without degrading host CPU cycle times. Internal serial data blocks align with deterministic networks like EtherNet\/IP and Profinet, enforcing strict packet execution timelines over the physical transceiver lines. All data exchanges map directly through the standard backplane, maintaining uniform firmware flash compatibility with Series 90-30 CPU modules running standard hardware configurations.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the IC693DNM200 module draw its network operational power entirely from the PLC backplane?\u003c\/p\u003e\n\u003cp\u003eA: No. While the internal logic processing circuitry is powered by the 5 VDC rail of the PLC backplane, the network physical layer transceivers require an external 24 VDC supply connected directly to the DeviceNet bus network tap.\u003c\/p\u003e\n\u003cp\u003eQ: What happens to the slave outputs if the master module stops communicating or a network drop occurs?\u003c\/p\u003e\n\u003cp\u003eA: The behavior depends on the configuration of each individual slave node. Slave hardware can be configured via the network management tool to either hold their last state or drop to a zero safety state upon losing the master heartbeat connection packet.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Termination\u003c\/strong\u003e: Install a standard 121 ohm, 0.25 W metal film resistor across the blue (CAN_H) and white (CAN_L) signaling lines at each physical end of the main trunk line to minimize signal reflections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis Ground Grounding\u003c\/strong\u003e: Lock the module into the chassis rail, making certain the rear metal grounding clip contacts the backplane housing framework to establish a solid path for high-frequency electrical noise suppression limits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparation of Traces\u003c\/strong\u003e: Route the DeviceNet drop cables through separate wiring conduits away from high-voltage AC motor lines and inductive power switching infrastructure to protect low-voltage digital bits from interference.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":53512512405688,"sku":"IC693DNM200","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/IC693DNM200_2.jpg?v=1779789693","url":"https:\/\/www.globalpetroparts.com\/products\/ge-fanuc-series-90-30-devicenet-master-module-ic693dnm200","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}