{"product_id":"ge-is200vcmih2be-vme-communication-interface-board","title":"GE IS200VCMIH2BE VME Communication Interface Board","description":"\u003cp\u003eThe \u003cstrong\u003eGE IS200VCMIH2BE\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIS200VCMI\u003c\/strong\u003e VME Communication Interface Board, operates as a dedicated hardware component for deterministic I\/O data routing and synchronization across the Mark VI Speedtronic control platform.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric (GE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIS200VCMIH2BE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard 6U VME Eurocard Format\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApprox. 0.45 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 degC to +65 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e+5 VDC @ 3.5 A (Typical VME Backplane Draw)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork Ports\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 x 100Base-FX Fiber Optic (ST\/SC Compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBus Interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIEEE 1014 VMEbus (Master\/Slave Capable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eFirmware Flash Compatibility and Backplane Bus Velocity\u003c\/h3\u003e\n\u003cp\u003eThe IS200VCMIH2BE requires strict firmware version alignment with the host controller (UCVI\/UCVG). Mismatched firmware revisions will force the board into a FAIL state during POST. The board utilizes the VMEbus P1\/P2 connectors to maintain a deterministic backplane bus velocity of 40 MB\/s for real-time data exchange with the turbine control processors. License keys stored in non-volatile memory dictate the available IONet node count and protocol execution limits.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the IS200VCMIH2BE be hot-swapped while the Mark VI rack is powered?\u003c\/p\u003e\n\u003cp\u003eA: No. Power must be removed from the entire VME rack before extracting or inserting the VCMI board to prevent backplane arcing and corruption of the flash memory sectors.\u003c\/p\u003e\n\u003cp\u003eQ: What is the function of the three fiber optic ports in a TMR configuration?\u003c\/p\u003e\n\u003cp\u003eA: In a Triple Modular Redundant setup, each port connects to a separate IONet segment (R, S, T) to facilitate data voting and ensure communication integrity even if one network path fails.\u003c\/p\u003e\n\u003cp\u003eQ: Does the H2BE revision support backward compatibility with older Mark VI I\/O packs?\u003c\/p\u003e\n\u003cp\u003eA: The H2BE hardware supports backward compatibility with IS200 series I\/O packs, but requires a firmware downgrade to match the existing system architecture; mixing firmware versions across the IONet is prohibited.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eInstall the IS200VCMIH2BE in Slot 1 of the VME rack. Ensure the ejector handles are fully latched to maintain proper connector seating pressure. Use only approved fiber optic patch cords with polished end-faces; inspect for dust using a microscope prior to connection. Route fiber cables away from high-voltage power lines to prevent EMI-induced signal jitter. Verify the gap voltage on adjacent TSI cards is stable before applying power to the VCMI to avoid initialization errors.\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":53601486930104,"sku":"IS200VCMIH2BE","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/IS200VCMIH2BE-2_65c0bb51-5835-4fae-a6bd-b332e6d9cf37.jpg?v=1781750551","url":"https:\/\/www.globalpetroparts.com\/products\/ge-is200vcmih2be-vme-communication-interface-board","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}