{"product_id":"ge-versamax-ic200alg630-analog-input-modules","title":"GE VersaMax IC200ALG630 Analog Input Modules","description":"\u003cp\u003eThe \u003cstrong\u003eGE IC200ALG630\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIC200ALG630\u003c\/strong\u003e Input Module, operates as a dedicated hardware component for temperature sensor digitization within VersaMax I\/O station platforms. The unit converts low-level physical analog signals from field-side thermal sensors into precise digital registers across the backplane bus. It establishes the electrical interface required to monitor thermistor or resistance variations, mapping continuous physical thermal measurements into discrete binary tracking blocks for real-time processing by the primary controller core.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC200ALG630\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.17 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e66.8 mm x 128 mm x 50.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e10 mA maximum at 5 VDC from backplane \/ 120 mA maximum at 24 VDC external\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Channels\u003c\/td\u003e\n\u003ctd\u003e8 isolated differential channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Sensors\u003c\/td\u003e\n\u003ctd\u003ePT100, PT200, PT500, PT1000, Ni100, Ni120, Cu10, and ohms (0-500 or 0-3000)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e16 bits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation Status\u003c\/td\u003e\n\u003ctd\u003e1500 VAC between field circuits and backplane logic layers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eI\/O Density Scaling\u003c\/h3\u003e\n\u003cp\u003eThe module handles multi-point high-resolution digitization arrays over 8 isolated paths while adhering strictly to structural platform limits. This optimization coordinates local I\/O density scaling transitions without introducing channel thermal dissipation limits or field-side loop interference. Permanent firmware flash compatibility within the baseline architecture guarantees reproducible filtering execution parameters, suppressing local scan loop latencies when deployed in mixed-signal DIN-rail configurations.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the IC200ALG620 or IC200ALG630 input modules undergo online insertion or extraction during active backplane operation?\u003c\/p\u003e\n\u003cp\u003eA: No, the hardware lacks internal micro-switches to arrest localized transient arcs. Hot-swapping the component while backplane logic or external 24 VDC excitation power is applied can permanently damage the local transceivers and drop downstream network drops.\u003c\/p\u003e\n\u003cp\u003eQ: How does the internal digitization circuit process an open wire loop or sensor element failure?\u003c\/p\u003e\n\u003cp\u003eA: The module checks circuit continuity systematically; detecting an open field conductor triggers a high-scale or low-scale error value in the diagnostic data word and alters the channel status bit layout.\u003c\/p\u003e\n\u003cp\u003eQ: Are 2-wire, 3-wire, and 4-wire resistance elements accommodated on the signal terminals?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the input hardware can be wired to interface with 2-wire, 3-wire, or 4-wire RTD configurations, provided matching channel registration parameters are selected in the central programming environment.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eFix the hardware housing vertically onto an approved 35 mm DIN-rail tracking base using a compatible VersaMax terminal carrier structure. Retain an unblocked perimeter border gap of at least 50 mm above and below the ventilation openings to support continuous natural convective cooling. Route all analog sensor lines through separate, grounded steel conduits fully isolated from parallel high-voltage AC distribution circuits. Terminate overall instrumentation cable shields directly at a single-point panel earth bar, ensuring low-resistance metal-to-metal continuity to protect the 16-bit digitization path from common-mode noise corruption.\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":53596299002040,"sku":"IC200ALG630","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/IC200ALG630_2.jpg?v=1781600576","url":"https:\/\/www.globalpetroparts.com\/products\/ge-versamax-ic200alg630-analog-input-modules","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}