{"product_id":"honeywell-fs-sicc-001-l8-in-system-interconnection-cable","title":"Honeywell FS-SICC-001\/L8-IN System Interconnection Cable","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHoneywell FS-SICC-001\/L8-IN\u003c\/strong\u003e is a \u003cstrong\u003eSystem Interconnection Cable (SIC)\u003c\/strong\u003e designed to connect Field Termination Assemblies (FTAs) to I\/O modules in Honeywell Safety Manager systems. This \u003cstrong\u003e8-meter\u003c\/strong\u003e cable is specifically configured for \u003cstrong\u003einput module connections\u003c\/strong\u003e, providing reliable signal transmission between field wiring interfaces and the safety controller with shielded construction for noise immunity in industrial environments.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Meter Length:\u003c\/strong\u003e Extended reach for flexible cabinet layout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Configuration:\u003c\/strong\u003e Optimized for digital and analog input module connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielded Construction:\u003c\/strong\u003e EMI\/RFI protection for signal integrity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Terminated Connectors:\u003c\/strong\u003e Factory-assembled for reliable, error-free installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Interconnection:\u003c\/strong\u003e Standard SIC interface for all Honeywell Safety Manager FTAs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Coded:\u003c\/strong\u003e Input-specific coding prevents misconnection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e FS-SICC-001\/L8-IN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e System Interconnection Cable (SIC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 meters (26.2 ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Input (IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e SIC standard (FTA to I\/O module)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding:\u003c\/strong\u003e Braided shield for EMI protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e Multi-conductor, twisted pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -40°C to +70°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Radius:\u003c\/strong\u003e Minimum 10× cable diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoute Planning:\u003c\/strong\u003e Plan cable route to avoid sharp bends (min 10× diameter) and interference sources\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFTA Connection:\u003c\/strong\u003e Plug one end into SIC connector on the FTA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/O Module Connection:\u003c\/strong\u003e Plug other end into corresponding SIC connector on I\/O module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding:\u003c\/strong\u003e Connect shield to single-point ground at one end only to avoid ground loops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrain Relief:\u003c\/strong\u003e Secure cable with tie-wraps to prevent connector stress\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the difference between \"IN\" and \"OUT\" SIC cables?\u003c\/strong\u003e\u003cbr\u003eA: \"IN\" cables are configured for input modules (digital\/analog inputs), while \"OUT\" cables are for output modules. They may have different pin assignments or color coding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use a longer cable than 8 meters?\u003c\/strong\u003e\u003cbr\u003eA: Maximum SIC cable length is specified in Safety Manager documentation. Exceeding this length may affect signal integrity. Consult system documentation or use signal repeaters for longer distances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this cable interchangeable with other SICC models?\u003c\/strong\u003e\u003cbr\u003eA: SICC cables are available in various lengths (e.g., L5 = 5m, L8 = 8m, L10 = 10m). Verify length requirements before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eSelection Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeasure actual distance between FTA and I\/O module, adding service loop (typically 10-20% extra)\u003c\/li\u003e\n\u003cli\u003eVerify \"IN\" vs. \"OUT\" configuration matches the I\/O module type\u003c\/li\u003e\n\u003cli\u003eFor redundant modules, order two SIC cables (one per redundant FTA)\u003c\/li\u003e\n\u003cli\u003eConsider cable management and routing when selecting length\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":53811802112184,"sku":"FS-SICC-001\/L8-IN","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/FS-SICC-001_L8-INr180.png?v=1785134514","url":"https:\/\/www.globalpetroparts.com\/products\/honeywell-fs-sicc-001-l8-in-system-interconnection-cable","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}