{"product_id":"is200egpag1bec-ex2100-excitation-ground-grid-board-ge","title":"IS200EGPAG1BEC EX2100 Excitation Ground Grid Board GE","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eGE IS200EGPAG1BEC\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIS200EGPAG1B\u003c\/strong\u003e Excitation Ground Grid Board, operates as a dedicated hardware component for grounding network diagnostics within EX2100 Excitation Control System platforms. The module monitors current and voltage leakage paths relative to system common grounds, facilitating isolating detection barriers between the high-power excitation bus and sensitive control loops. It registers micro-ampere level baseline deviations and scales data outputs to safeguard processing backplanes from voltage breakdown transients.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003eModel\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eIS200EGPAG1BEC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003eBrand\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eGE (General Electric)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003eOrigin\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003eWeight\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003e0.92 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003eDimensions\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003e178 mm x 127 mm x 41 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"7\"\u003eOperating Temp\u003c\/td\u003e\n\u003ctd data-row=\"7\"\u003e-30 to 65 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"8\"\u003ePower Consumption\u003c\/td\u003e\n\u003ctd data-row=\"8\"\u003e18 W maximum rated draw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"9\"\u003eFunctional Core\u003c\/td\u003e\n\u003ctd data-row=\"9\"\u003eGround fault grid isolation interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"10\"\u003eInput Channel Type\u003c\/td\u003e\n\u003ctd data-row=\"10\"\u003eHigh-impedance differential sensing nodes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eBackplane Bus Communication Velocity and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe IS200EGPAG1BEC inserts straight into the control carrier infrastructure, using internal bus traces to match standardized backplane bus communication velocity frameworks. Ground leakage indicators and differential calculation metrics route continuously to master processor registers. Local configurations and revision arrays are held within the structural onboard EEPROM, allowing the software compiler to run flash firmware compatibility matches and secure synchronous operation variables without sequence interrupts.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the IS200EGPAG1BEC board be extracted while the generator excitation circuit is online?\u003c\/p\u003e\n\u003cp\u003eA: No. Removing this card during live loop operation disrupts active ground loop fault path analysis. An unmonitored isolation state change can cause the main processor to command an immediate backup trip scenario to maintain electrical isolation profiles.\u003c\/p\u003e\n\u003cp\u003eQ: How does the functional card handle high transient voltages on the ground grid input terminals?\u003c\/p\u003e\n\u003cp\u003eA: The board includes passive current-limiting networks and high-voltage optocouplers that supply robust galvanic isolation. This construction blocks incoming transient surge signals from tracking into lower voltage backplane bus logic sectors.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-Static Safety Practices\u003c\/strong\u003e: Technical personnel must connect an approved, grounded ESD wrist strap directly to the control panel metal framework before unpacking or installing the board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuide Rail Mechanical Loading\u003c\/strong\u003e: Align the card boundaries cleanly along the chassis plastic tracks. Press straight inward until the backplane plug seats completely into the socket layer, then lock the face screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround Track Continuity Verification\u003c\/strong\u003e: Confirm that the card rear surface grounding tabs form a clean, low-resistance mechanical interface with the structural metal rack carrier rail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Wiring Separations\u003c\/strong\u003e: Route external ground detection lines through dedicated low-voltage wiring pathways, ensuring separation from variable frequency drive or phase conductor leads to inhibit crosstalk.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":53503664160952,"sku":"IS200EGPAG1BEC","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/IS200EGPAG1BEC_3_1.jpg?v=1779675032","url":"https:\/\/www.globalpetroparts.com\/products\/is200egpag1bec-ex2100-excitation-ground-grid-board-ge","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}