{"product_id":"is200hslah1a-ge-ex2100-interface-module","title":"IS200HSLAH1A GE EX2100 Interface Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eGE IS200HSLAH1A\u003c\/strong\u003e serves as the primary \u003cstrong\u003eIS200HSLA\u003c\/strong\u003e Interface Module utilized to execute High-Speed Serial Link (HSSL) data transmission across EX2100 Excitation Control System platforms. The board functions as a physical communication bridge, routing serialization commands and feedback metrics between the core control rack and external bridge monitoring circuits. It standardizes point-to-point differential signaling paths to ensure low-latency data packets map accurately to active processing frames.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003eModel\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eIS200HSLAH1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003eBrand\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eGE (General Electric)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003eOrigin\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003eWeight\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003e0.58 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003eDimensions\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003e178 mm x 127 mm x 32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"7\"\u003eOperating Temp\u003c\/td\u003e\n\u003ctd data-row=\"7\"\u003e-30 to 65 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"8\"\u003ePower Consumption\u003c\/td\u003e\n\u003ctd data-row=\"8\"\u003e12 W maximum rated draw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"9\"\u003eInterface Type\u003c\/td\u003e\n\u003ctd data-row=\"9\"\u003eHigh-Speed Serial Link (HSSL) channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"10\"\u003eOptical\/Electrical Layout\u003c\/td\u003e\n\u003ctd data-row=\"10\"\u003eDiscrete isolation circuit paths with standard multi-pin array plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eBackplane Bus Communication Velocity and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe IS200HSLAH1A interfaces with the internal rack backplane bus structure, matching baseline communication velocities required for high-frequency regulation loops. Real-time serial transmission latency is tightly managed through dedicated hardware-level framing routines to maintain determinism under full system loads. Firmware flash compatibility vectors are hardcoded within the onboard diagnostic EEPROM, enabling the main controller platform to verify physical assembly revisions and calibration configurations during initial power-up sequencing.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the IS200HSLAH1A interface module be replaced while the control rack is energized? A: No. Hot-swapping the IS200HSLAH1A board during live operation is strictly prohibited. Disconnecting active high-speed serial links interrupts the field feedback pathway, resulting in immediate communication loss diagnostics and a subsequent shutdown sequence of the exciter drive system.\u003c\/p\u003e\n\u003cp\u003eQ: How is signal degradation prevented across the high-speed interface connectors? A: The module incorporates built-in high-frequency decoupling filters and differential line transceivers. These components isolate low-voltage logical bus tracks from external common-mode noise and EMI transients present on long cable runs to remote terminal interfaces.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD Control Implementation\u003c\/strong\u003e: Installation engineers must fasten an approved, grounded anti-static wrist strap directly to the unpainted cabinet steel frame before manipulating or inserting the board assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Carrier Mounting\u003c\/strong\u003e: Slide the module along the chassis guide tracks inside the dedicated slot housing. Press inward until the rear pins register completely with the backplane board socket, then anchor the faceplate retention screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Strain Relief Layout\u003c\/strong\u003e: All serial interface cables linked to the front panel port arrays must be bundled and anchored via tie-wraps to the internal support structure to prevent physical load and tension on the plug connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Cleanliness Boundaries\u003c\/strong\u003e: Ensure the surrounding installation layer remains free of conductive metal particulates or airborne grease residues that could settle over exposed printed circuit tracks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":53503662751928,"sku":"IS200HSLAH1A","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/IS200HSLAH1A_2_1.jpg?v=1779674874","url":"https:\/\/www.globalpetroparts.com\/products\/is200hslah1a-ge-ex2100-interface-module","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}