{"product_id":"network-interface-units-ge-versamax-ic200dbi001","title":"Network Interface Units GE VersaMax IC200DBI001","description":"\u003cp\u003eThe \u003cstrong\u003eGE IC200DBI001\u003c\/strong\u003e serves as the primary \u003cstrong\u003eIC200DBI001\u003c\/strong\u003e Network Interface Unit utilized to execute distributed I\/O data concentration across VersaMax I\/O platforms. The module operates as a dedicated slave station on a DeviceNet network while managing the localized bidirectional scanning of attached discrete and analog hardware modules. It executes autonomous real-time protocol conversion, translation of data objects, and cyclic data transmission between the high-level network scanner and the proprietary local carrier base.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC200DBI001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.15 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e66.8 mm x 128 mm x 50.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e70 mA at 5 VDC from backplane \/ 50 mA from DeviceNet network\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Network\u003c\/td\u003e\n\u003ctd\u003eDeviceNet Slave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBus Data Rates\u003c\/td\u003e\n\u003ctd\u003e125 Kbps, 250 Kbps, 500 Kbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal Expansion Capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 8 expansion I\/O modules per station\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe hardware platform enforces structural interface timings modeled after specifications found in Profinet \/ EtherNet\/IP deterministic networks. Internal transceiver electronics serialize backplane data registers smoothly to match high-speed network master poll cycles, ensuring minimal transport jitter. Full firmware flash compatibility within the system configuration ensures proper validation of physical data packets, enabling predictable node behavior and preventing logic timeouts during localized I\/O density scaling transitions on the DIN-rail.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is hot-swapping the IC200DBI001 interface unit supported during active operation?\u003c\/p\u003e\n\u003cp\u003eA: No, the hardware architecture does not support live hot-swap functionality. Disconnecting or inserting this network interface module while the backplane assembly is energized will disrupt bus communications and may permanently degrade the internal transceiver components.\u003c\/p\u003e\n\u003cp\u003eQ: How is the physical station network node address configured on this unit?\u003c\/p\u003e\n\u003cp\u003eA: The DeviceNet MAC ID node address and baud rate parameters are assigned via physical rotary or DIP hardware switches positioned on the side profile of the interface housing assembly.\u003c\/p\u003e\n\u003cp\u003eQ: What occurs to the connected I\/O states if the primary network connection is severed?\u003c\/p\u003e\n\u003cp\u003eA: Upon a total network communication loss condition, the module activates localized diagnostics and commands all downstream discrete and analog outputs to drop to their preset fail-safe configurations.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eMount the interface module in a vertical orientation onto a level 35 mm DIN-rail path using an approved system carrier base. Ensure a standard boundary gap of at least 50 mm above and below the external housing walls to permit unimpeded natural ventilation for thermal heat sink dissipation. Wire the field network interface using an approved, shielded 5-pin open terminal block connector arrangement to eliminate electromagnetic line noise. Ground the DIN-rail mechanism directly to the central low-impedance master enclosure ground bar to prevent common-mode voltage disruptions.\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":53596201222328,"sku":"IC200DBI001","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6132\/3704\/files\/IC200DBI001_1.jpg?v=1781597896","url":"https:\/\/www.globalpetroparts.com\/products\/network-interface-units-ge-versamax-ic200dbi001","provider":"Global Petro Parts Automation","version":"1.0","type":"link"}