Bently Nevada 330103-00-04-10-02-00 3300 XL 8mm Proximity Probe

Product Overview

The Bently Nevada 330103-00-04-10-02-00 acts as the primary sensing hardware for the 3300 XL 8mm Proximity Transducer System. This eddy current probe provides non-contact, high-precision measurement of vibration and position for high-speed rotating machinery. We supply this unit as 100% Brand New and Original, ensuring full compatibility with OEM monitoring systems for critical asset protection.

Part Number Breakdown

The 330103 series utilizes a modular configuration. This specific model features:

• 00 (Unthreaded Length): 0.0 inches.

• 04 (Overall Case Length): 4.0 inches.

• 10 (Total Length): 1.0 Metre (3.3 feet).

• 02 (Connector/Cable): Miniature coaxial ClickLoc™ connector, standard cable.

• 00 (Agency Approval): No specific hazardous area approvals required.

Technical Specifications

This probe delivers linear output signals when paired with a 3300 XL Proximitor® Sensor.

Engineering Advantages

• High-Vibration Integrity: The ClickLoc™ connector features a mechanical locking mechanism. It prevents the cable from self-loosening during operation, a critical failure mode in high-vibration turbine environments.

• Thermal Stability: Advanced design minimizes "thermal drift," allowing the sensor to maintain sub-micron accuracy even as ambient temperatures fluctuate inside the machine housing.

• Durable Construction: The polyphenylene sulfide (PPS) probe tip and stainless steel case resist moisture and oil penetration, extending the sensor's lifespan in aggressive industrial atmospheres.

• Interchangeability: As part of the 3300 XL family, this probe allows for complete field interchangeability. Technicians can replace individual probes without recalibrating the entire transducer system, significantly reducing maintenance downtime.

FAQs

Is this probe compatible with a 5-meter or 9-meter system?

Since this probe has a 1.0-meter total length, it integrates into a 5-meter system when paired with a 4.0-meter extension cable, or a 9-meter system when paired with an 8.0-meter extension cable. Always verify your Proximitor® calibration before installation.

Can I use this 3300 XL probe with an older 3300 Proximitor?

Yes. Bently Nevada designed the 3300 XL 8mm components to be backwards compatible with standard 3300 8mm systems. However, using the full 3300 XL series provides superior performance and temperature range.

What is the recommended installation gap?

While application-specific, a typical installation sets the probe at the mid-point of its linear range (approximately 1.27 mm or 50 mils). We recommend using a digital voltmeter to monitor the DC gap voltage during installation to ensure the sensor stays within its calibrated range.

Is this unit refurbished?

No. We offer only 100% Brand New Bently Nevada equipment. Each probe arrives in its original factory packaging, ensuring the highest reliability for your machinery protection system.