Bently Nevada 330103-00-05-05-02-00 3300 XL 8mm Proximity Probe

Product Overview

The Bently Nevada 330103-00-05-05-02-00 serves as a high-performance eddy current sensor for the 3300 XL 8mm Proximity Transducer System. It provides critical non-contact measurements of shaft vibration and position on rotating machinery. We supply this unit as 100% Brand New and Original, ensuring your protection system operates with genuine OEM precision and reliability.

Part Number Breakdown

The 330103 series configuration for this specific unit includes:

Technical Specifications

This probe integrates seamlessly into the 3300 XL ecosystem to deliver accurate displacement data.

• Probe Tip Diameter: 8 mm

• Case Material: 303 Stainless Steel

• Operating Temperature: -35 °C to +177 °C (-31 °F to +350 °F)

• Connector Type: Gold-plated ClickLoc™ Miniature Coaxial

• System Calibration: 7.87 V/mm (200 mV/mil) when used with 3300 XL Proximitor

• Linear Range: 2.0 mm (80 mils)

• Weight: Approx. 0.35 Kg

• Condition: 100% Brand New Original

Engineering Advantages

• Deep-Reach Mounting: The 5.0-inch case length allows the probe to pass through thick machine housings or deep mounting brackets, ensuring the tip reaches the shaft surface without requiring complex custom adapters.

• ClickLoc™ Connection Security: The 02 connector option features the ClickLoc™ mechanism. This design incorporates a physical locking detent that prevents the cable from backing out or vibrating loose, maintaining signal continuity in high-vibration environments.

• Exceptional Thermal Stability: Bently Nevada utilizes advanced materials that minimize "thermal drift." This ensures that measurement accuracy remains consistent even as temperatures inside the turbine or motor housing fluctuate during startup and full-load operation.

• Interchangeability: As a standard 3300 XL component, this probe requires no individual calibration. You can swap this probe with any other 3300 XL 8mm probe of the same electrical length without re-adjusting the Proximitor® sensor.

FAQs

How do I determine if this 0.5m probe is right for my system?

This probe has a total electrical length of 0.5 meters. You must pair it with a 4.5m or 8.5m extension cable to match the total system length (5m or 9m) specified on your Proximitor® sensor label.

Does this probe include the mounting nuts?

Yes, standard Bently Nevada proximity probes include two locknuts to facilitate secure positioning and gapping within the mounting bracket.

What is the advantage of the 100% Brand New status for this sensor?

Vibration sensors are sensitive to internal fatigue and tip contamination. A Brand New unit guarantees the integrity of the internal coil and the PPS tip overmold, preventing "phantom" vibration signals or "NOT OK" status errors caused by aging or prior mishandling.

What torque should I apply to the ClickLoc™ connector?

The ClickLoc™ connector is designed for finger-tightening. Once you feel the "click," the connection is secure. Avoid using pliers or wrenches, as over-tightening can crush the miniature coaxial shielding and degrade the signal.