BMXFCC203 | Schneider 2m 40-Way FCN Cord Set

Product Overview

The Schneider Electric BMXFCC203 is a 40-way preformed cord set for the Modicon X80 automation platform. It provides a 40-pin FCN connector on the module side and two HE10 connectors on the field side, with a cable length of 2 meters. This factory-assembled cable ensures consistent, error-free connections between X80 I/O modules and field termination equipment, reducing commissioning time and wiring errors.

Key Specifications

• Product Family: Modicon X80 preformed cord set
• Cable Length: 2 meters (6.56 feet)
• Total Wires: 40 conductors
• Module Side: 40-way FCN connector
• Field Side: 2 x HE10 connectors
• Wire Section: 0.324 mm²
• Platform: Modicon M340 / M580 X80

Features and Benefits

• Factory-tested assembly ensures reliable signal transmission
• 2-meter length ideal for compact control cabinets and adjacent rack installations
• Dual HE10 connectors support flexible I/O splitting strategies
• Color-coded wiring simplifies field-side termination
• Industrial-grade shielding protects against electrical noise
• Reduces installation labor compared to hand-wired field terminations

Applications

• Short-run I/O connections in compact control enclosures
• Telefast ABE7 sub-base connections for discrete I/O modules
• Machine builder standardized cable harnesses
• Panel shops requiring pre-tested, repeatable cable assemblies

FAQ

Q: What is the difference between BMXFCC203 and BMXFCC303?
A: BMXFCC203 is 2 meters long; BMXFCC303 is 3 meters long. Both use the same 40-way FCN to 2x HE10 configuration.

Q: Can I use this cord set with analog I/O modules?
A: Yes. The 40-way cord set is compatible with both discrete and analog X80 I/O modules featuring a 40-pin FCN connector.

Q: What wire gauge is used in this cable?
A: The cord set uses 0.324 mm² conductors for reliable signal and power transmission.

Installation Guide

1. De-energize the rack before installing or removing cables
2. Connect the FCN connector to the X80 I/O module front port
3. Route the 2-meter cable along panel cable trays
4. Attach HE10 connectors to the field terminal blocks
5. Avoid sharp bends and secure with cable ties every 300 mm
6. Perform continuity check before system startup

Selection Tips

• Select BMXFCC203 for 2-meter cable runs in compact installations
• For 3-meter runs, choose BMXFCC303
• For 5-meter runs, choose BMXFCC503
• Confirm module connector type is 40-pin FCN before ordering
• Order extra units for spare inventory and future expansion