FC-TSFIRE-1624 | Honeywell | Safe Fire Detector Input Field Termination Assembly

Product Overview

The Honeywell FC-TSFIRE-1624 is a Safe Fire Detector Input Field Termination Assembly (FTA) providing 16 channels for fire and gas detection devices in Honeywell Safety Manager systems. This FTA provides the critical interface between fire alarm field devices and the safety controller, with specialized line monitoring and fault detection for life safety applications.

Key Features

• 16 Fire Detector Input Channels: Dedicated for fire and gas detection loops
• Specialized Line Monitoring: Enhanced detection of wiring faults in detector circuits
• EOL Resistor Compatible: Supports standard fire alarm end-of-line resistor configurations
• System Interconnection: SIC cable interface to SFIRE-1624 I/O modules
• Fire & Gas Application Ready: Designed for NFPA and EN 54 compliant systems
• DIN Rail Mounting: Universal snap-in for TS32/TS35 rails

Technical Specifications

• Model: FC-TSFIRE-1624
• Type: Safe Fire Detector Input FTA
• Channels: 16
• Application: Fire and gas detector input
• Input Compatibility: Conventional fire detectors, gas detectors
• Line Monitoring: Open, short, ground fault detection
• DIN Rail: TS32 / TS35 × 7.5
• Wire Size: Max 2.5 mm² (AWG 14)
• Operating Temperature: -40°C to +70°C
• Approvals: CE, TÜV, UL, CSA, FM

Installation Guide

1. DIN Rail Mount: Snap FTA onto TS32/TS35 rail
2. Detector Connection: Wire fire/gas detectors per loop diagram
3. EOL Resistor: Install end-of-line resistors at last detector in each loop
4. Loop Test: Verify loop integrity using Safety Manager diagnostic tools
5. SIC Connection: Connect to SFIRE-1624 module via SIC cable

FAQ

Q: What is the difference between FC-TSFIRE-1624 and FS-TSFIRE-1624?
A: They are functionally identical. "FC-" and "FS-" prefixes denote manufacturing variants.

Q: How many detectors can be connected per channel?
A: This depends on the detector type and loop current. Refer to detector manufacturer specifications and Safety Manager documentation for maximum loop capacity.

Selection Tips

• Use for fire and gas detection applications in Safety Manager systems
• Verify compatibility with specific detector models and EOL configurations
• Ensure compliance with local fire safety regulations