Honeywell 900RTS-0001 16-Channel Remote Terminal Panel

Product Overview

The Honeywell 900RTS-0001 is a 16-channel Remote Terminal Panel (RTP) designed for the ControlEdge HC900 controller family. It provides a convenient, DIN-rail mountable termination point for digital input (DI), digital output (DO), and analog output (AO) field wiring. By relocating terminal connections away from the I/O module, the 900RTS-0001 simplifies maintenance, supports module insertion and removal under power (IRUP), and improves cabinet wire management.

Key Features

• 16 universal channels for DI, DO, and AO signals
• DIN rail mounting for flexible cabinet placement
• Supports module IRUP (Insertion/Removal Under Power) when properly configured
• Dedicated terminals for all field connections with clear labeling
• Compact size: 111.1 × 94.0 × 66.0 mm
• 250 VAC voltage rating
• Compatible with low-voltage RTP cables (900RTC-Lxxx series)

Technical Specifications

• Model: 900RTS-0001
• Product Type: Remote Terminal Panel (RTP)
• Series: ControlEdge HC900
• Channels: 16 universal (DI / DO / AO)
• Mounting Type: DIN rail
• Dimensions (L × W × H): 111.1 × 94.0 × 66.0 mm (4.38" × 3.70" × 2.60")
• Weight: ~180 g (0.4 lbs)
• Voltage Rating: Up to 250 VAC
• Operating Temperature: 0°C to +60°C
• Storage Temperature: −40°C to +85°C
• Humidity: 5% to 95% RH (non-condensing)
• Cable Compatibility: 900RTC-L010, 900RTC-L025, 900RTC-L050 (low voltage)
• Certifications: CE

Typical Applications

• Control cabinet wire management and organization
• Maintenance-friendly I/O termination
• Process control panel design
• Systems requiring frequent module replacement
• Space-constrained enclosures where front access is limited

FAQ

Installation Guide

1. DIN Rail Mounting: Snap the 900RTS-0001 onto a standard 35 mm DIN rail at the desired location in the control cabinet.
2. Field Wiring: Connect field devices to the clearly labeled terminals. Use appropriate wire gauge (typically 0.5–2.5 mm²) and torque to specification.
3. RTP Cable Connection: Connect the low-voltage RTP cable between the panel and the corresponding HC900 I/O module.
4. Shielding: For analog outputs, use shielded cable and ground the shield at one end.
5. Labeling: Apply wire labels and panel markings for future maintenance clarity.
6. IRUP Verification: If IRUP is required, verify the system configuration and power routing support module hot-swap.

Selection Tips

• Choose the 900RTS-0001 for DI, DO, and AO termination in standard process control applications.
• For analog input termination, use the 900RTA-L001 analog input RTP.
• For relay output termination, use the 900RTR-H001 relay output RTP.
• Select cable length based on cabinet layout — 1.0 m, 2.5 m, or 5.0 m options available.
• For SIL2 safety systems, use the 900RTI-0100 redundant SIL UIO RTP instead.