Schneider BMXAMI0410 4-Ch Isolated High-Level Analog Input

Product Overview

The Schneider Electric BMXAMI0410 is a 4-channel isolated high-level analog input module for the Modicon X80 platform. It supports multiple voltage and current ranges with 16-bit resolution and 24-bit A/D conversion for precise process measurement.

• Analogue Input Number: 4 isolated channels
• Input Types: ±20 mA, 0...20 mA, 4...20 mA, ±10 V, ±5 V, 0...10 V, 0...5 V, 1...5 V
• Analogue Input Resolution: 16 bits
• A/D Conversion: 24 bits
• Input Impedance: 10 MΩ (voltage) / 250 Ω + protective resistor (current)
• Permitted Overload: ±30 V (voltage ranges) / ±90 mA (current ranges)
• Read Cycle Time: Fast 1 ms + 1 ms × channels used; Nominal 5 ms for 4 channels
• Isolation Voltage: 300 V DC between channels; 1400 V DC channels to ground/bus
• Common Mode Rejection: 90 dB
• Status LEDs: RUN (green), channel diagnostic (green), ERR (red), I/O (red)
• Net Weight: 0.143 kg
• Power Consumption: Typical 0.82 W at 24 V DC / 0.32 W at 3.3 V DC
• Operating Temperature: 0...60 °C

Key Features

• Channel-to-channel isolation
• High-speed acquisition suitable for continuous process control
• Internal recalibration
• Compatible with Modicon M340 and M580

FAQ

• What signal ranges are supported? Voltage (±10 V, ±5 V, 0-10 V, 0-5 V, 1-5 V) and current (±20 mA, 0-20 mA, 4-20 mA).
• Is isolation provided between channels? Yes, full channel-to-channel isolation.
• What is the resolution? 16-bit analogue input resolution with 24-bit conversion.
• How is the module connected? Via a 20-way removable terminal block.

Installation Guide

1. Insert the module into an available X80 rack slot and lock with the captive screw.
2. Attach the 20-way terminal block.
3. Wire sensors according to the selected voltage or current range configuration.
4. Configure input type and filtering in EcoStruxure Control Expert.
5. Verify channel diagnostic LEDs after power-up.

Selection Tips

• Select BMXAMI0410 for high-level isolated analog inputs requiring fast update rates.
• Use when channel isolation is mandatory for signal integrity.
• For non-isolated or higher channel density, evaluate BMXAMI0800 series.
• Confirm terminal block type (screw or spring) matches project standards.