10008/2/U | Honeywell FSC Communication Module

Product Overview

The Honeywell 10008/2/U is an FSC-SMM (Safety Manager Module) Communication Module for the Honeywell FSC (Fail Safe Control) system.

Key Specifications

• Model Number: 10008/2/U
• Product Type: FSC-SMM Communication Module (Safety Manager Module)
• Series: Honeywell FSC (Fail Safe Control)
• Storage Type: EPROM-based (discontinued)
• Successor: 10018/2/U (Flash-based replacement)
• Network Interface: Universal Control Network (UCN)
• System Integration: Honeywell TotalPlant Solution (TPS) / TDC 3000
• Processor: Motorola 68360 Quad Integrated Communication Controller, 25 MHz
• Communication Controller: Motorola 68824 Token Bus Controller (10 MHz)
• Modem: Motorola 68194 Carrierband Modem
• Memory:
  • EPROM: 4 Mbit (FSC firmware program storage)
  • Local RAM: 16 Mbit (with parity, for user application data)
  • Shared RAM: 2 Mbit (for FSC control processor data exchange)
  • EEPROM: 1 kbit (configuration data)
• Communication Links: Redundant isolated channels A and B
• Power Requirements: 5 Vdc, 2 A
• Ripple Content: < 50 mV p-p
• Space Requirements: 8 TE, 3 HE (= 8 HP, 3U)
• Type Number: 10008/2/U 10101
• Software Version: ≥ 400
• Approvals: CE, TÜV, UL

LED Status Indicators

• STATUS:
  • Off = Power down
  • Red = Offnet / Alive (not connected to UCN)
  • Green = UCN running (normal operation)
  • Red/Green flashing = Program fail
• Tx (Transmit): On during data transmission
• P (Primary): On = Primary node; Off = Secondary node
• A/B: On = Active communication channel

Jumper Configuration

• J1/J2: Sets COM port number (COM1 through COM4)
• System Bus Jumper: Must be opened for 5-SBUS, 7-SBUS, 12-SBUS, or 17-SBUS connection

FAQ

Q: Is the 10008/2/U still in production?
A: No. The 10008/2/U is an EPROM-based module that has been discontinued by Honeywell. It has been replaced by the 10018/2/U, which is Flash-based and offers improved performance and reliability.

Q: What is the difference between 10008/2/U and 10018/2/U?
A: The 10008/2/U uses EPROM for firmware storage (discontinued). The 10018/2/U uses Flash memory for firmware storage (current production). Both provide identical UCN communication functionality.

Q: How does the FSC-SMM appear on the UCN network?
A: From the GUS operator station, the Safety Manager (SM) appears as a UCN node just like an HPM. The SM's inputs are read from FSC I/O modules, and its outputs are written back to FSC inputs, enabling seamless integration with the TPS control strategy.

Q: What communication protocols are supported?
A: The module supports FSC-FSC, FSC-DS, ModBus RTU, and ModBus H&B protocols via the UCN token bus network.

Q: Can the 10008/2/U be used in redundant configurations?
A: Yes, the module supports redundant isolated communication links (channels A and B) for high-availability UCN connections.

Installation Guide

1. Power down the FSC Central Part rack completely.
2. Remove the system bus jumper to enable 5-SBUS, 7-SBUS, 12-SBUS, or 17-SBUS connection.
3. Insert the 10008/2/U into the designated Central Part slot (8 TE, 3 HE).
4. Configure COM port number using jumpers J1 and J2 (COM1-COM4).
5. Connect UCN cable to the module's UCN interface port.
6. Power up the FSC system and verify STATUS LED turns green (UCN running).
7. Configure SM points in TPS builder software (similar to HPM point configuration).