3BSE069449R1 | ABB CI854BK01 Profibus Communication Interface Kit

Overview

The ABB CI854BK01 3BSE069449R1 is a PROFIBUS-DP/V1 master communication interface kit designed for AC 800M controllers to provide high-speed, reliable fieldbus networking and configuration access to remote I/O systems and intelligent field devices.

Technical Specifications

• Product Type: Communication Interface Kit
• Part Number: 3BSE069449R1
• Model: CI854BK01
• Protocol: PROFIBUS-DP/V1
• Interface Type: Master
• Number of Channels: 2 (Provides redundant line capability)
• Baud Rate: 9.6 kbit/s to 12 Mbit/s
• Maximum Number of Slaves per Line: 125
• Power Supply: 24 V DC
• Power Dissipation: 5 W
• Current Consumption +24 V External: 160 mA
• Isolation: Galvanic isolation from the controller system
• HART Pass-Through Support: Yes
• Redundancy Support: Yes (Module redundancy and line redundancy)
• Front LEDs: F(ault), R(un), P(ower), L1 (Line 1 Status), L2 (Line 2 Status)
• Connection Termination: D-sub 9-pin female connector
• Product Net Width: 59 mm
• Product Net Depth: 127.5 mm
• Product Net Height: 185 mm
• Product Net Weight: 0.7 kg

Key Features

• Supports full PROFIBUS-DP/V1 functionality including acyclic data communication for advanced asset management and device tuning.
• Features dual master channels to enable complete physical network line redundancy for critical uptime applications.
• Enables seamless routing of HART configuration data via PROFIBUS pass-through directly to connected intelligent field instruments.
• Integrates directly onto the AC 800M controller backplane via a simple plug-and-lock modular configuration framework.
• Provides comprehensive onboard diagnostics with clear visual LED arrays indicating operational status, line connection health, and module faults.

Installation Notes

• Mount the module onto the designated slots of the AC 800M communication interface baseplate inside a clean, grounded control panel.
• Connect PROFIBUS network drops using certified shielded twisted-pair cables terminated with standard 9-pin D-sub connectors.
• Ensure that active bus termination resistors are correctly switched ON at both physical endpoints of the PROFIBUS segment.
• Verify the communication interface address allocation and redundant parameter mapping within the engineering software environment before downloading configuration files.