5464-458 | Woodward | Discrete Output Module 64 Ch

Woodward 5464-458 NetCon Discrete Output 64-Channel Card

The Woodward 5464-458 is a 64-channel discrete output card for NetCon 5000 digital control systems. It provides high-density digital output control for solenoids, relays, indicators, and other on/off field devices in turbine, engine, and industrial automation applications.

Key Specifications

• Part Number: 5464-458
• Product Type: Discrete Output Card
• Series: NetCon 5000
• Manufacturer: Woodward, Inc.
• Channels: 64 discrete outputs
• Output Type: Digital on/off (typically 24 V DC sourcing/sinking)
• Current per Channel: Verify in module documentation (typically 0.5–2 A per channel)
• Isolation: Channel-to-channel and channel-to-system isolation
• Operating Temperature: 0°C to 60°C
• Storage Temperature: -40°C to 85°C
• Humidity: 5% to 95% non-condensing
• Mounting: NetCon 5000 chassis slot

Features & Benefits

1. High Channel Density: 64 outputs in a single module reduce chassis slot requirements.
2. Isolation Protection: Galvanic isolation prevents fault propagation between channels.
3. Fast Switching: High-speed output response for real-time control applications.
4. Diagnostic LEDs: Per-channel status indication simplifies troubleshooting.

Applications

• Solenoid valve control in turbine fuel systems
• Relay driver for auxiliary equipment
• Status indicator and alarm horn control
• Sequence control in automated processes

FAQ

Q: What is the maximum current per output channel?
A: Per-channel current varies by revision. Typical NetCon DO cards support 0.5–2 A per channel. Consult your specific module datasheet for exact ratings.

Q: Can 5464-458 drive inductive loads directly?
A: For inductive loads (solenoids, relays), use external suppression diodes or MOV protection to prevent voltage spikes from damaging output circuits.

Installation Guide

1. Install 5464-458 into NetCon 5000 chassis slot.
2. Connect field devices to output terminals per wiring diagram.
3. Install suppression devices on all inductive loads.
4. Configure output logic in Woodward control software.
5. Test each channel individually to verify proper operation.

Selection Tips

• Load Type: Confirm your field devices are within the module's voltage and current ratings.
• Channel Count: 64 channels suit high-density applications; smaller systems may use 16- or 32-channel alternatives.
• Response Time: Verify switching speed meets your sequence control requirements.