6ES7132-4BD32-0AA0 Siemens SIMATIC DP, 5 Electronic Module

Product Overview

The Siemens 6ES7132-4BD32-0AA0 is a digital output electronic module for the SIMATIC ET 200S distributed I/O system. It provides 4 digital outputs (DO) at 24V DC / 2A per channel, delivering robust switching capability for solenoid valves, contactors, and indicator lamps. With short-circuit protection and diagnostic feedback, it ensures reliable actuator control in industrial automation environments.

Key Specifications

• Module Type: Digital Output (DO)
• Number of Outputs: 4 channels
• Rated Output Voltage: 24V DC
• Output Current: 2 A per channel
• Total Current: 4 A (sum of all channels)
• Output Type: Transistor, short-circuit proof
• Switching Frequency: Up to 100 Hz (resistive load)
• Power Loss: Typ. 0.8 W
• Dimensions (W × H × D): 15 mm × 81 mm × 52 mm
• Weight: 35 g

Compatibility & Applications

Compatible with all ET 200S interface modules and TM-E terminal modules. Suitable for solenoid valve control, relay driving, motor starter interfacing, alarm horn/lamp switching, and general 24V DC load control in factory automation, process skids, and machine control panels.

FAQ

• Q: What is the maximum current per channel? A: 2 A per channel, with a total module limit of 4 A. Do not exceed the total current rating.
• Q: Does it have short-circuit protection? A: Yes, each output is electronically short-circuit protected. A group error LED indicates fault conditions.
• Q: Can I switch AC loads? A: No, this is a DC-only transistor output module. For AC loads, use relay output modules from the ET 200S portfolio.
• Q: What wire gauge is supported? A: Terminal modules support 0.14 mm² to 2.5 mm² (AWG 26–14) conductors.

Installation Guide

1. Mount the TM-E terminal module on the DIN rail.
2. Connect 24V DC loads to the terminal module outputs.
3. Insert 6ES7132-4BD32-0AA0 into the terminal module.
4. Apply 24V DC load voltage to the terminal module power terminals.
5. Test each output via STEP 7 / TIA Portal or direct ladder logic activation.

Selection Tips

• Select 6ES7132-4BD32-0AA0 for 4-channel high-current digital output (2A per point) in ET 200S systems.
• For 8-point output density, consider 6ES7132-4BF00-0AA0 (8 DO, 0.5 A per channel).
• For safety outputs, use ET 200S fail-safe DO modules with PROFIsafe certification.
• Ensure your power module (PM-E) can supply sufficient current for all output channels.