6ES7134-6JD00-0CA1 Siemens Analog Input Module 8 Channels

Product Overview

The Siemens 6ES7134-6GF00-0AA1 is a high-density analog input module for the SIMATIC ET 200SP distributed I/O system. It provides 8 universal analog input channels supporting voltage (U), current (I), RTD, and thermocouple (TC) signals. With 16-bit resolution and configurable measurement types per channel, it offers maximum flexibility for mixed-signal process applications in a single compact module.

Key Specifications

• Module Type: Analog Input (AI), Universal
• Number of Inputs: 8 channels
• Input Types: Voltage (±80 mV, ±250 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V), Current (±3.2 mA, ±10 mA, ±20 mA, 0–20 mA, 4–20 mA), RTD, Thermocouple
• Resolution: 16 bits (including sign)
• Conversion Time: 50 ms per channel (configurable)
• Wire-Break Monitoring: Yes, for 4–20 mA and TC/RTD
• Isolation: Galvanic isolation between channels and backplane
• Base Unit Type: A0 or A1
• Power Loss: Typ. 0.75 W
• Dimensions (W × H × D): 15 mm × 73 mm × 58 mm

Compatibility & Applications

Compatible with ET 200SP IM155-6 interface modules and BaseUnits A0/A1. Ideal for multi-parameter process skids, HVAC monitoring, water treatment instrumentation, pharmaceutical batch reactors, and food processing lines requiring mixed voltage, current, and temperature inputs in a single module.

FAQ

• Q: Can I mix voltage, current, and temperature sensors on the same module? A: Yes, each channel is independently configurable for U, I, RTD, or TC via TIA Portal hardware configuration.
• Q: What is the maximum cable length for current signals? A: Shielded cables up to 800 m are supported for current loops (4–20 mA) depending on source impedance.
• Q: Does it support HART protocol? A: No, this is a standard analog input module. For HART communication, use ET 200SP HART-enabled AI modules.
• Q: What is the difference between 6GF00 and 6GD00? A: 6GF00 provides 8 channels with universal U/I/RTD/TC support, while 6GD00 provides 4 channels optimized specifically for RTD/TC.

Installation Guide

1. Install a compatible BaseUnit (BU15-P16+A0+2B or A1) on the ET 200SP DIN rail.
2. Insert 6ES7134-6GF00-0AA1 into the BaseUnit.
3. Connect analog signal sources to the push-in terminals, observing polarity for voltage/current inputs.
4. Configure each channel's measurement type, range, and diagnostics in TIA Portal.
5. Calibrate if necessary and verify readings against calibrated references.

Selection Tips

• Choose 6ES7134-6GF00-0AA1 for 8-channel universal analog input with mixed U/I/RTD/TC capability.
• For higher performance (faster conversion, enhanced diagnostics), consider 6ES7134-6JF00-0CA1 (High Feature).
• Verify total analog input count; one 8-channel module reduces BaseUnit count versus two 4-channel modules.
• Use external signal conditioners for sensors with non-standard output ranges.