900P01-0001 | Honeywell 60W HC900 Power Supply Module

Product Overview

The Honeywell 900P01-0001 is a 60W switching power supply module for the Honeywell ControlEdge HC900 hybrid control platform. It converts 120/240 VAC universal input to regulated 5 VDC and 24 VDC outputs, providing reliable power to the CPU, I/O modules, and communication modules. With wide input voltage range, comprehensive protection features, and compact chassis-mounted design, this power supply ensures continuous operation in demanding industrial environments.

Key Features

• Universal AC Input: 85–265 VAC, 47–63 Hz for global deployment
• Dual DC Outputs: 5 VDC @ 6 A and 24 VDC @ 2 A
• 60W Total Power: Sufficient for standard HC900 rack configurations
• Comprehensive Protection: Overcurrent, overvoltage, and short-circuit protection
• High Efficiency: > 85% typical, reducing heat generation
• Chassis Mount: Single-slot design for HC900 racks

Technical Specifications

• Model: 900P01-0001
• Type: AC/DC Switching Power Supply
• Series: ControlEdge HC900
• Input Voltage: 85–265 VAC, 47–63 Hz
• Output Voltage 1: 5 VDC @ 6 A (30W)
• Output Voltage 2: 24 VDC @ 2 A (48W)
• Total Output Power: 60W
• Efficiency: > 85%
• Protection: Overcurrent, overvoltage, short-circuit, thermal
• Dimensions: 137 mm H × 72.6 mm W (5.4" H × 2.86" W)
• Weight: 820 g
• Mounting: Single slot in HC900 rack
• Operating Temperature: 0°C to +60°C
• Status: Discontinued (replaced by 900P01-0301/0501 series)
• Approvals: CE, TÜV, UL508, CSA

Installation Guide

1. Rack Preparation: Install in dedicated power supply slot of HC900 rack
2. AC Input: Connect 120/240 VAC to input terminals with proper grounding
3. Output Verification: Verify 5 VDC and 24 VDC LEDs indicate normal operation
4. Load Calculation: Ensure total rack power consumption does not exceed 60W
5. Fusing: Install external circuit breaker per local electrical codes

FAQ

Q: What replaced the 900P01-0001?
A> The 900P01-0001 has been discontinued and replaced by 900P01-0301 and 900P01-0501 series power supplies with enhanced specifications.

Q: Can I use 900P01-0001 with new HC900 racks?
A> Yes, the 900P01-0001 is mechanically compatible with all HC900 racks. However, for new installations, consider the replacement models for long-term support.

Q: What is the 5 VDC output used for?
A> The 5 VDC output powers the CPU and I/O module logic circuits. The 24 VDC output powers field devices and I/O channels.

Selection Tips

• For new installations, order 900P01-0501 (latest 60W AC power supply)
• Calculate total rack power: CPU (~3.75W) + I/O modules (refer to power table) + field devices
• For redundant power, use 900R08R/900R12R racks with dual power supplies and 900PSM status module
• For 24 VDC input applications, use 900P24-0501 DC power supply instead