ABB CI830 3BSE013252R1 S800 I/O PROFIBUS DP-V0 Communication Interface

Product Overview

The ABB CI830 (3BSE013252R1) functions as a high-performance Fieldbus Communication Interface (FCI) for the S800 I/O system. This module enables a cluster of S800 I/O modules to communicate with a master controller over a PROFIBUS DP-V0 network. We supply this unit as 100% Brand New and Original, providing the deterministic bridge required to translate field data into standard PROFIBUS protocols. It serves as the primary head station for remote I/O clusters, managing both the ModuleBus communication and the external fieldbus link.

Technical Specifications

The CI830 utilizes standardized PROFIBUS protocols to integrate S800 I/O into diverse control architectures:

Engineering Advantages

• Seamless Multi-Vendor Integration: The CI830 utilizes the industry-standard PROFIBUS DP-V0 protocol. This allows engineers to connect S800 I/O clusters not only to ABB AC 800M controllers but also to third-party PLCs and DCS systems, protecting existing hardware investments.

• High-Speed Deterministic Control: The module supports baud rates up to 12 Mbit/s with automatic baud rate detection. This ensures rapid data throughput and low-latency updates for time-critical process loops across the distributed network.

• Scalable Cluster Architecture: A single CI830 manages up to 12 I/O modules on a single electrical ModuleBus. By utilizing optical Modulebus ports, you can extend this capacity to 24 modules, allowing for massive I/O density from a single network node.

• Robust Hardware Protection: The module features galvanic isolation between the PROFIBUS DP interface and the internal electronics. This barrier prevents ground loops and transient voltage spikes on the fieldbus from damaging the I/O cluster or the master controller.

• Simplified Maintenance Diagnostics: Front-facing LED indicators provide instant visual feedback on power status, module faults, and network activity. This transparency allows technicians to identify communication bottlenecks or hardware failures without specialized diagnostic tools.

FAQs

• Does the CI830 support PROFIBUS DP-V1 features?

  No. The CI830 specifically supports the DP-V0 cyclic data exchange protocol. If your application requires acyclic communication (DP-V1) for HART pass-through or advanced device management, we recommend the CI840 series.

• How do I set the PROFIBUS station address on this module?

  The CI830 features two rotary switches on the front panel. You use these to manually set the station address (01-99) before powering up the module and connecting it to the network.

• Is this a refurbished or used unit?

  Absolutely not. We guarantee this CI830 (3BSE013252R1) is 100% Brand New original hardware. It arrives in the original ABB factory-sealed packaging with all security labels and technical documentation intact.

• Does the CI830 require a specific baseplate?

  Yes. You must mount the CI830 on a compatible Module Termination Unit (MTU) such as the TU810, TU812, or TU814. The MTU provides the physical connections for the 24V DC power and the PROFIBUS DP cable.