Allen-Bradley 2711C-F2M PanelView Component C200 2in

Product Overview

The Allen-Bradley 2711C-F2M is a PanelView Component C200 Terminal with a 2-inch monochrome transflective FSTN display and keypad input. Designed for low-end visualization and control tasks, this compact terminal communicates via RS-232, RS-485, and USB, making it an ideal interface for MicroLogix, Micro800, and PowerFlex 4 devices.

Key Specifications

• Display Size: 2 inches
• Display Type: Monochrome transflective FSTN passive matrix
• Resolution: 122 × 32 pixels
• Display Area: 49 × 14 mm (1.93 × 0.55 in.)
• Input Type: Keypad (4 function keys F1–F4, Up, Down, Left, Right, Enter)
• Input Voltage: 18–30 VDC (24 VDC nominal)
• Power Consumption: 5 Watts
• Communication Ports: RS-232 (DH-485/DF1), RS-485, USB
• Backlight Life: 50,000 hours minimum, non-replaceable

Features

1. Ultra-compact 2-inch form factor fits space-constrained control panels
2. Built-in design software eliminates need for PC-based configuration tools
3. Multiple serial protocols support DH-485, DF1, Modbus, and Siemens MPI
4. USB port enables fast application transfer and firmware updates
5. Transflective monochrome display ensures readability in varying light conditions

FAQ

Q: What controllers are compatible with the 2711C-F2M?
A: This terminal is optimized for Allen-Bradley MicroLogix and Micro800 controllers, as well as PowerFlex 4 drives.

Q: Can the backlight be replaced?
A: No. The LED backlight is integrated into the display and is not field-replaceable.

Q: Is this terminal still in production?
A: The 2711C-F2M has been discontinued by the manufacturer. Replacement units are available through surplus channels.

Installation Guide

• Cut a panel opening matching the terminal mounting dimensions
• Connect 24 VDC power to the terminal block (18–30 VDC range accepted)
• Never connect commons together between ports to avoid device damage
• Attach RS-232 or RS-485 communication cables to the controller
• Use the USB port to load or modify the terminal application
• Secure the terminal with quick-lever mounting clips

Selection Tips

• The C200 series is designed for simple, low-cost HMI applications
• For numeric keypad input, consider the 2711C-K2M variant
• Verify 24 VDC power availability in your control cabinet
• Ensure compatible communication protocol support with your controller