Allen Bradley 800T-N376G 800T Series Green LED Replacement Lamp

Product Overview

The Allen Bradley 800T-N376G operates as a high-intensity, universal-type green LED replacement lamp designed for the 800T 30mm pushbutton and pilot light series. This solid-state light source replaces traditional incandescent bulbs to provide superior vibration resistance and extended operational life in harsh industrial environments. We supply this component in 100% Brand New original condition, ensuring peak luminosity and color consistency for your control interface.

Technical Specifications

This lamp features a standard bayonet base for secure mechanical seating and optimal electrical contact within the socket.

Engineering Advantages

• Optimized Signal Visibility: The green LED output delivers a sharp, monochromatic wavelength that penetrates industrial haze and glare more effectively than filtered white light. This ensures operators receive clear "Status OK" or "Running" signals instantly.

• Dual-Power Efficiency: The universal circuitry allows the lamp to operate efficiently across different voltage profiles. It draws only 13 mA at 24V DC and a mere 8.5 mA at 120V AC, significantly reducing the thermal load on control transformers.

• Vibration Immunity: Unlike delicate filaments in incandescent bulbs, this solid-state LED withstands the high-frequency vibration found near motors and heavy machinery. This eliminates frequent maintenance intervals caused by "blown" indicator bulbs.

• Seamless Retrofitting: The bayonet base locks securely into the pilot device housing with a simple push-and-twist motion. This design prevents the lamp from loosening due to mechanical shock during pushbutton actuation.

FAQs

• Is the 800T-N376G a standalone replacement bulb? While it fits the standard socket, Allen Bradley specifies that you must use this lamp with the 800TC-N374 socket assembly. Combining these components ensures the internal resistance matches the 3V DC lamp requirements and prevents premature LED failure.

• Can I use a Green LED behind a Red or Clear lens? We recommend using the 800T-N376G behind a Green or Clear lens. Using a green LED behind a red lens will result in extremely poor light output because the red filter blocks the green wavelength. For best results, always match the LED color to the lens color.

• What is the primary benefit of switching from incandescent bulbs to this LED? This Brand New LED lamp virtually eliminates heat generation within the pilot device. Excessive heat from traditional bulbs often cracks or discolors plastic lenses over time; the 800T-N376G keeps the lens cool and extends the life of the entire operator interface.

• How do I verify the condition of the lamp? We ship every unit in factory-original packaging. Look for the distinct green housing on the LED itself, which identifies the color output and distinguishes it from the 3V DC white or red variants.