ASMBKT185 | Schneider Modicon | MB+ End Connector w/ 120 ohm

Schneider Electric ASMBKT185 Modicon M580 ePAC 19-Inch Rack Mounting Bracket Kit

The ASMBKT185 is a mounting bracket kit for Schneider Electric's Modicon M580 ePAC (Ethernet Programmable Automation Controller). It enables installation of M580 ePAC controllers into standard 19-inch equipment racks, providing secure mechanical support and proper airflow for reliable operation in industrial control cabinets and data centers.

Key Specifications

• Manufacturer: Schneider Electric
• Series: Modicon M580 ePAC
• Type: Mounting Bracket Kit
• Function: 19-inch rack mounting for M580 ePAC controllers
• Kit Contents:
  • 2 × mounting brackets
  • 4 × M5 screws
• Compatible Controllers: Modicon M580 ePAC (Ethernet Programmable Automation Controller)
• Rack Standard: 19-inch EIA-310-D compliant equipment rack
• Mounting Method: Front-mount or slide-rail installation into 19-inch rack
• Material: Steel (powder-coated or zinc-plated for corrosion resistance)
• Product Weight: 0.3 kg (0.66 lb) [estimated based on kit contents]
• Status: Active / In production

Architecture & Functionality

• 19-Inch Rack Compatibility: Designed for standard 19-inch (482.6 mm) wide equipment racks used in industrial control cabinets and IT infrastructure
• ePAC Support: Specifically engineered for M580 ePAC form factor, ensuring proper alignment and secure mounting
• Airflow Management: Bracket design maintains proper clearance for M580 ePAC cooling airflow, preventing overheating in rack-mounted configurations
• Mechanical Stability: Steel construction provides robust support for M580 ePAC weight and vibration resistance
• Quick Installation: Pre-drilled holes and included M5 screws enable fast, tool-free installation

Installation Guide

1. Verify the 19-inch rack has adequate depth and clearance for the M580 ePAC controller.
2. Attach the 2 mounting brackets to the sides of the M580 ePAC using the 4 included M5 screws.
3. Align the bracket-mounted ePAC with the rack mounting rails (front or slide-rail configuration).
4. Secure the brackets to the rack rails using appropriate rack screws (not included — use standard M5 or M6 rack screws).
5. Ensure proper airflow clearance (minimum 50 mm front and rear) for M580 ePAC cooling.
6. Connect Ethernet cables (Cat 5e/6) and power cables to the M580 ePAC.
7. Power on and verify M580 ePAC status via EcoStruxure Control Expert diagnostics.

FAQ

Q: Is ASMBKT185 compatible with M340 or Quantum?
A: No. ASMBKT185 is specifically designed for Modicon M580 ePAC controllers. M340 uses different mounting solutions (typically DIN rail), and Quantum uses rack-mount or panel-mount chassis with different bracket designs.

Q: Does ASMBKT185 include rack screws?
A: No. The kit includes 4 M5 screws for attaching brackets to the M580 ePAC. Rack mounting screws (for attaching brackets to the 19-inch rack) must be ordered separately — use standard M5 or M6 rack screws.

Q: Can I use ASMBKT185 for wall mounting?
A> No. ASMBKT185 is designed for 19-inch rack mounting only. For wall or panel mounting, use the standard M580 ePAC mounting feet or order a dedicated wall-mount kit.

Q: What is the weight capacity?
A: The brackets are rated for the full weight of the M580 ePAC controller (typically 2–3 kg depending on module configuration). Always verify total rack load capacity.

Q: Is ASMBKT185 required for all M580 ePAC installations?
A: No. ASMBKT185 is only required for 19-inch rack installations. For DIN rail or panel mounting, use the standard M580 ePAC mounting accessories.

Selection Tips

• M580 ePAC, 19-inch rack mounting: ASMBKT185
• M580 ePAC, DIN rail mounting: Use standard M580 ePAC DIN rail clips (included with controller)
• M580 ePAC, panel mounting: Use standard M580 ePAC mounting feet (included with controller)
• Always verify: Rack depth (minimum 400 mm recommended), rack load capacity, and airflow clearance before ordering
• Order rack screws separately: M5 or M6 rack screws (quantity depends on rack type)