Bently Nevada 330103-00-06-10-02-CN 3300 XL 8 mm Proximity Probe

Product Overview

The Bently Nevada 330103-00-06-10-02-CN functions as a high-precision eddy current sensor within the 3300 XL Proximity Transducer System. It facilitates non-contact measurement of shaft vibration and axial position for critical rotating machinery, including turbines, compressors, and gearboxes. We supply this unit as 100% Brand New and Original, ensuring full compliance with regional CN regulatory standards and OEM performance benchmarks.

Part Number Breakdown

This model utilizes a modular configuration to meet specific mechanical and regional requirements:

Technical Specifications

This probe delivers exceptional linearity and thermal stability under rigorous industrial conditions.

• Tip Diameter: 8 mm

• Tip Material: Polyphenylene sulfide (PPS)

• Case Material: AISI 303 or 304 Stainless Steel (SST)

• Linear Range: 2.0 mm (80 mils) typical

• Scale Factor: 7.87 V/mm (200 mV/mil) when paired with 3300 XL Proximitor

• Operating Temperature: -35 °C to +177 °C (-31 °F to +350 °F)

• Connector Type: Gold-plated ClickLoc™ locking mechanism

• Condition: 100% Brand New Original

Engineering Advantages

• Deep-Housing Reach: The 60 mm case length allows the probe to pass through thick machine casings or mounting blocks. This ensures the sensing tip reaches the target surface without the need for custom-machined extension sleeves.

• Vibration-Proof Connection: The ClickLoc™ connector employs a mechanical locking detent. This feature prevents the coaxial cable from backing out or loosening due to continuous machine vibration, eliminating intermittent "NOT OK" signal status errors.

• Aggressive Fluid Resistance: The PPS tip and stainless steel body resist degradation from synthetic oils, moisture, and industrial lubricants. This robust construction ensures long-term measurement stability inside hot, fluid-rich machine environments.

• Regional Compliance: The CN suffix guarantees the hardware complies with specific field notifications and safety certification standards required for the Chinese industrial market, simplifying the local procurement and audit process.

FAQs

Is this 1.0m probe compatible with a 5-meter or 9-meter system?

To maintain the calibrated scale factor, you must match the total electrical length. This 1.0m probe integrates into a 5-meter system when paired with a 4.0m extension cable, or a 9-meter system when paired with an 8.0m extension cable. Always verify your Proximitor® label for the required "System Length."

What is the benefit of the "CN" approval suffix?

The "CN" suffix indicates the product meets specific regulatory requirements and carries the necessary documentation for the Chinese market. Functionally, it performs identically to the standard 3300 XL probe but ensures compliance for local safety inspections and imports.

What torque should I apply during installation?

Technicians should apply a maximum of 11.2 N·m (100 in·lb) of torque. We recommend monitoring the DC gap voltage with a digital voltmeter (DVM) during installation to set the correct gap and prevent the probe tip from striking the shaft.

Does the unit ship in original factory packaging?

Yes. We supply only 100% Brand New units in original Bently Nevada factory boxes, complete with serial numbers and necessary factory-issued certificates.