Emerson DeltaV KJ4006X1-BD1 Interface Terminal Block SE4006P2

Overview

The Emerson KJ4006X1-BD1 is an Interface Terminal Block designed for the DeltaV™ Distributed Control System (DCS). It provides secure and reliable field wiring connections for industrial automation applications, certified for hazardous-area installations.

Technical Specifications

• Manufacturer: Emerson
• Model: KJ4006X1-BD1
• Type: Interface Terminal Block
• Field Power: 35 VDC at 1 A
• Weight: 300 g

Environmental & Safety Ratings

• Operating Temperature: −40 °C to +70 °C
• Shock Resistance: 10 g, ½ sine wave for 11 ms
• Vibration Resistance: 1 mm peak-to-peak (2–13.2 Hz); 0.7 g (13.2–150 Hz)
• Relative Humidity: 5 % – 95 % non-condensing
• Airborne Contaminants: ISA-S71.04-1985 Class G3
• Hazardous Area: ATEX, IECEx certified

Key Features

• Secure field wiring for stable signal transmission within DeltaV control systems
• Industrial durability for harsh environments
• Optimized power distribution at 35 VDC / 1 A
• Seamless integration with DeltaV control system architectures
• Zone 2 hazardous-area compatibility

FAQ

Q: What I/O cards are compatible with this terminal block?
A: The KJ4006X1-BD1 is designed for DeltaV DCS I/O cards. Verify the rotary key position matches your specific card model.

Q: Can I install this with power on?
A: No. Field power and system power must be de-energized before removing or inserting the terminal block.

Q: Does this block require calibration?
A: No calibration is required for the terminal block itself.

Installation Guidelines

1. Set the rotary key position to match the paired I/O card.
2. Slide the terminal block onto the carrier until it latches securely.
3. Route field wiring through the cabinet gland and terminate per the I/O card diagram.
4. Torque screws to manufacturer specification to prevent loosening under vibration.

Selection Tips

• Use KJ4006X1-BD1 when your DeltaV I/O card calls for the BD1 terminal block key position.
• Verify hazardous-area certification markings (ATEX/IECEx) for your region.
• Ensure field power does not exceed 35 VDC at 1 A per block.